Setup or modifying a Zebra Printer Configuration using ZebraNet Bridge

Article ID: 19902475

Details


 

Description

Using ZebraNet Bridge to configure a Zebra Printer

Applies To

ZebraNet Bridge 

Excludes: 2824 Series, 2844 Series, S4M (E53 Firmware Version), 888 DD/TT Series, MZ Series, ZQ110, EM220, EM220II, All Kiosk (except KR403)

Requirements

ZebraNet Bridge Read More>>

Overview

ZebraNet Bridge can be used to configure your Zebra Printer using the Management Window. ZebraNet Bridge creates the ZPL configuration command based on the selections you make in the Group Management Window when you have your printer installed and selected. These configuration override the printer settings so assure they are correctly set or match those settings required for your printer application.

Procedure

Changing Printer Settings

If you are making changes to your printer settings or just trying to make some adjustments it is good practice to list the printer Configuration or print a Configuration Label before proceeding. Read More>>

To change the settings of a printer:

1.From the Group Management window, expand the printer that you want to change.This will retrieve the printer settings.

User-added image

 

2.Expand the subfolder that contains settings. Settings will be listed in the Group Management box and under the Content folder. Identify the parameter you want to change. There will either be a drop down list or a value you can enter.   

User-added image

3.In the Value column, select the field that you want to change. 

4.Double-click on the field. Some settings have a list to choose from; other settings have a value to change. 
 

User-added image

 -- or --

User-added image

5.Change the settings. 

6.To save the settings, select the printer.

7.Right-click and select Save. A warning confirms that you want to save changes.

 User-added image

8.Are you sure you want to save the changes? Select Yes to send the ZPL commands to the printer.

Helpful Information

ZebraNet Bridge User Guide Read More>>