Unable to See Data on MK1000 Display due to Poor Contrast
Article ID: 05476663
Symptom
Unable to read the display on MK1000.
Root Cause
The contrast setting is misadjusted.
Resolution
Adjust the Contrast Control button on the side of the MK1000 until desired contrast is reached.
Use a small screwdriver to make the contrast adjustments. The Contrast Control button is located next to the reset switch on the lower right side of the MK1000. It is marked with a ‘C’ (inside a circle).
Use a small screwdriver to make the contrast adjustments. The Contrast Control button is located next to the reset switch on the lower right side of the MK1000. It is marked with a ‘C’ (inside a circle).
