UV Image Print Quality Issues When Using ZXP Series 8 Card Printer

Article ID: 48495253

Details


Topic or Information

Correcting issues with the quality of the UV image being printed on your cards

Applies To

Zebra ZXP Series 8 Card Printer

Details

There are two modes used to print a UV image, Single Pass or Double Pass. 

The Single Pass mode prints the UV panel along with the color panels. Since the UV panel is dye sublimation material it will diffuse into the other color dye sublimation material. The fluorescing characteristics are considerable diminished unless there are no colors where the UV material is being printed. 

The  Double Pass mode prints the UV dye sublimation material after the color material is transferred to the card and then transfers the UV material to the card. This process prevents the UV material from diffusing into the color material thus producing a brighter UV image on the card.

Solution:

Review the following link for setting the UV printing parameters in the Windows Driver. Read More>>

If this fails to resolve your issue please select “Submit a Case Online” located under “Additional Assistance” (right column of this page) and provide details related to your problem for technical support assistance