WS2000 Secure Access

Article ID: 18387892

Question

Why Can I still Access the WS2000 via Browser or Telnet after Securing User Access?

Facts

The WS2000 is designed so that if the firewall option is disabled, it will allow all user access

Answer

In order to secure user access via Telnet, HTTP or HTTPS to the WS2000, the firewall option must be enabled.
To enable the firewall, go to the WS2000 Firewall - Disable Firewall screen, then uncheck the option to disable the firewall and apply your changes. This will secure the device correctly