Xi-Series and 105SL - Rewind Mode Operation

Article ID: 72119275



Topic or Information

Rewind Option information

Applies To

Table Top Printers with a Rewind Option


This information will help a understanding and using the Rewind Option as well as make adjustments if any issues are encountered such as

  • Uneven rewinding or telescoping of the rewound media
  • Labels peeling when rewinding.
  • Fails to rewind when the rewind spindle is almost full


Problem Solution
Labels peel before getting to the rewind spindle

 Loading the media for rewinding requires that the curved rewind plate be installed onto the front of the printer. If the plate is not installed the labels may peel from the liner or tags may tear. The labels are routed back onto the rewind spindle. Read More>>


Labels are telescoping or not rewinding evenly Rewind Plate tracking adjustment. This adjustment can be made if the printed labels are not rewinding neatly onto the rewind spindle. There is an adjustable hook plate located on the rewind plate to help correct telescoping or uneven winding of the printed labels onto the rewind spindle. Read More>>

+ Product Codes

  • 105SLPlus Industrial Printers
  • 105SLPlus Industrial Printers
  • 110Xi4 Industrial Printer
  • 140Xi4 Industrial Printer
  • 170Xi4 Industrial Printer
  • 220Xi4 Industrial Printer
  • Xi Series Industrial Printers