Zebra Setup Utility ACS Cisco AP LEAP WPA-LEAP

Article ID: 20375469

Details


Topic or Information

LEAP and WPA-LEAP setup using the Zebra Setup Utility, a Cisco ACS radius server and Cisco Access Point

Applies To

Zebra wireless enabled printers

Details

The following link illustrates a typical LEAP and WPA-LEAP setup using the Zebra Setup Utility, a Cisco ACS radius server and Cisco Access Point   Please note that this example is an illustration only.   Questions regarding the Cisco ACS radius server and Cisco AP should be directed to Cisco.

Here is an example of a typical LEAP and WPA-LEAP setup using the Zebra Setup Utility, a Cisco ACS radius server and Cisco Access Point  Read More>>

Additional Information

Configure Wireless Settings  Read More>>

+ Product Codes

  • MZ Series
  • MZ-220
  • MZ-320
  • Mobile Printers
  • P4T Mobile Printers
  • P4T Mobile Printers
  • QL Series Mobile Printers
  • QL320 Mobile Printer
  • QL420 Mobile Printer
  • QLn Series Healthcare Mobile Printers
  • QLn Series Mobile Printers
  • QLn220 Healthcare
  • QLn220 Mobile Printer
  • QLn320 Healthcare
  • QLn320 Mobile Printer
  • QLn420 Mobile Printer
  • RW 220 Mobile Printer
  • RW 420 Mobile Printer
  • RW 420 Print Station
  • RW Series Mobile Printers
  • ZQ500 Series Mobile Printers
  • ZQ510 Mobile Printer
  • ZQ520 Mobile Printer
  • ZR300 Series Mobile Printers
  • ZR338 Mobile Printers
  • ZR600 Series Healthcare Mobile Printers
  • ZR600 Series Mobile Printers
  • iMZ Series Mobile Printers
  • iMZ220 Mobile Printer
  • iMZ320 Mobile Printer