ZebraDesigner for mySAP Version 2 Tips and Advice

Article ID: 30043414

Details


 

Topic or Information

ZebraDesigner Version 2 Tips and Advice

Applies To

ZebraDesigner for MySAP v2 Software

Excludes: 2824 Series, 2844 Series, S4M (E53 Firmware Version), 888 DD/TT Series, MZ Series, ZQ110, EM220, EM220II, All Kiosk (except KR403)

Details

With the release of ZebraDesigner for mySAP Version 2 software the following list of Tips and Advice is available.

1. When entering values for RSS composite bar codes, you need to provide the value for the linear and composite (2D) parts at the same time. Use the following syntax for entering values for RSS composite bar codes. The pipe character (|) is used to distinguish between the components. Syntax:  | Example: 12345|description

2. By double clicking on the name of the printer in the status bar at the bottom of the design screen, the user can quickly gain access to the printer settings dialogs.

3. Design your label using internal fonts, bar codes and counters to improve throughput.

4. Objects can be arranged with respect to each other by selecting the objects and clicking the desired alignment button.

5. Objects can be arranged with respect to the label by holding the ctrl button when the user presses the alignment button.

6. It is important to remember to add the / and space character to scripts when creating user SAP scripts

7. To print Unicode content, please be sure to use the Unicode device types, available from SAP. See the document “REFGUIDE.pdf” that is included in the “C:\Program Files\Zebra Technologies\ZebraDesigner for mySAP Business Suite 2\Support” directory.

8. The Status Monitor regularly checks the printer for current status information. When the driver is being used over a network connection, this can have the effect of consuming connection ports that would otherwise be used for accepting print jobs at the printer. If the Status Monitor is in use and you are experiencing a delay in printing, try right clicking over the Status Monitor in the system tray (by the clock) and closing the Status Monitor.