ZebraNet Print Server II, and 2824, 2844, & 3842 Desktop Printers - Installing, configuring and troubleshooting on a wired network

Article ID: 52792489

Details


 
 

Important: If you are using an LP2844 printer that is used for or supplied by a shipping vendor (i.e. UPS or FedEx for example) DO NOT try to load standard firmware or drivers from the Zebra Website. These printers are used exclusively with the shipping vendor's driver and label application. Read More>>

Topic or Information

Installing, configuring, and troubleshooting a printer on an Ethernet Wired Network using the ZebraNet Print Server.

Applies To

LP2824, TLP2824
LP2844, TLP2844, TLP3842

Details

The printer supports an optional internal ZebraNet II Ethernet Interface or the use of a parallel port attached ZebraNet Print Server. (The external can be a ZebraNet II or a ZebraNet 10/100)

Set up and configuration can be accomplished using the Zebra Setup Utility or ZebraNet Bridge. 

  • ZebraNet Bridge can be used to discover and assign the desired network settings. Read More>>
  • The Zebra Setup Utility has a network setup wizard that can be used to configure your printer for a wired or wireless network Read More>>

 

Troubleshooting Hints Read More>>
 

Additional Information

 

Status Indicators for the ZebraNet Print Servers

  • Internal and External Print Server II  Read More>>
  • Internal and External 10/100 Print Server  Read More>>