ZQ110 Black Mark Media Calibration
Article ID: 25915480
Topic or Information The ZQ110 printer supports Black Mark Media trackingApplies To ZQ110Details Auto Calibration Function The Black mark paper printing function requires the recognition of Black mark paper’s black bar in order to print. If black mark paper’s black bar are not properly recognized, use the auto calibration function. Auto Calibration Instructions
1. Turn the printer power off while in black mark print mode. 2. Press and hold down the paper feed button and then press the power button.
3. After the following printout is outputted, press the power button to perform auto calibration.
Select the mode
- Auto Calibration: Power Button
- Self Test: Feed Button
4. Printer feeds three pages of Black mark paper when performing auto calibration
|
+ Product Codes
- ZQ110 Mobile Printers