MT20x0 Bluetooth Cradle Connection Delay Upon System Resume Hotfix Release Notes, SPR24311, Version 184.108.40.206
This hotfix fixes the issue that, on system resume, it takes approx 25 seconds for Bluetooth to reconnect to the STB2078 cradle.
This hotfix fixes the issue that Bluetooth takes approx 25 seconds to reconnect to the STB2078 cradle on system resume.
This hotfix fixes the issue that the scan engine intermittently stops after host change.
This hotfix fixes the issue that the Bluetooth and scanning stop working with ADCServices after using BTExplorer API to access the Bluetooth stack.
This hotfix fixes the issue that, in some situations, Bluetooth data transferring has additional delay right after pairing with STB2078 cradle.
This release of the hotfix fixes the issue that MT2000 scanner Raw Mode setting is not synchronized to STB2078 cradle on cradle connection.
First release of the Hotfix. This Hotfix fixes the issue that in ADCServices, Cable USB is not enumerated correctly in Mod jack after switching setting in the USB configuration menu. This Hotfix also fixes the Factory Default does not clear out the Custom Defaults issue.
The installed file should be in the following folder on the scanner:
The following is the procedure to apply the Hotfix. It is assumed that the ActiveSync installed on the PC.
1) ActiveSync the scanner to a PC;
2) Open up the “Platform” folder on the device using “Explore” on ActiveSync;
3) Copy the patch DLL file to “Platform” folder:
4) Cold boot the scanner (by press and hold scan trigger and ‘2’ key. Wait for screen going black the 2nd time and release the trigger and key. Or, just remove the battery and reinsert it to cold boot.)
The scanner should boot up with the Hotfix applied.