MC65 Operating System BSP 4.47.02 - Hotfix CFE 1.0 Release Notes


SPR26507 MC65 RevC “gets Host Mode Error using device in 4 slot Ethernet cradle”.


When the USB client drains over 300mA from the MC65, a dialog window with the error "Excessive Host Mode Current Threshold Exceeded" gets displayed on the touch screen. Users would need to re-insert the device into the cradle to recover from the issue. The cab file provided in this posting will help recover the device without having to reinsert the MC65 into the cradle. When issue occurs, and the user closes the dialog window, the device will recover automatically.




Device Compatibility

This software release has been approved for use with the following Zebra devices.


Operating System


Windows mobile 6.5


Installation Requirements

MC65, BSP version: 04.47.02 or earlier

Installation Instructions

For NORMAL installation of the PATCH:


1. Copy “SPR26507_MC65_W65_en_034404_v” file to application folder on the device by using Microsoft Active Sync or Mobile Device Center.

2. Navigate on the device to the application folder.

3. Deploy the solution by tapping on the "SPR26507_MC65_W65_en_034404_v" file.

4. After successful deployment of the "SPR26507_MC65_W65_en_034404_v" file, device will do an automatic warm boot.


For MSP or REMOTE installation of the PATCH:


1. Set up MDM (MSP, Soti, Airwatch, etc..) to send “SPR26507_MC65_W65_en_034404_v” file to the application folder of the device.

2. To deploy the solution, setup in MDM to programmatically install the cab file “SPR26507_MC65_W65_en_034404_v” file.

3.  Changes will take effect after a manual reboot of the terminal or if MDM reboots device.

Part Number and Release Date




February 2015