MC67 Base Model Operating System BSP 01.56.04 - Hotfix CFE 01.01.00 Release Notes

Introduction

HotFix CFE (Cumulative Fixes from Engineering) Package contains multiple SPR Hotfixes into a single package. The HotFix CFE Package helps the end users to keep up to date with all the SPR Hotfixes for given product software release / revision.

HotFix CFE packages are validated only by engineering validation team and the package follows Zebra Technologies HotFix Package Policy

Description

CFE package CFE_MC67_NA_015604_WM_EN_v010100_e_WB/CFE_MC67_NA_015604_WM_EN_v010100_e_NB file includes the following HotFixes:

SPR No

Synopsis

28965

After a warm/cold boot, if the backlight turns off ( manually/time out), it does not turn on without a device suspend/resume.

 

Package Detailss

CFE_MC67_NA_015604_WM_EN_v010100_e_WB.cab (CFE package with auto warm boot)

CFE_MC67_NA_015604_WM_EN_v010100_e_NB.cab (CFE package without auto warm boot)

Device Compatibility

This HotFix CFE Package software release has been approved for use with the following Zebra devices.

Device

Operating System

BSP Version

MC67NA Base model

WM 6.5

v01.56.04

 

Installation Requirements

The HotFix CFE cab can be deployed to the Mobile device through any one of the below mentioned methods. For installing the cab, the users should have at least one of the below mentioned tools.

- Windows Mobile Device Center (For Windows Desktops)

- SD Cards / Micro SD cards

- MDM Set up

 

Installation Instructions

For Normal installation of the PATCH:

Windows Mobile Device Center (For Windows Desktops) Installation Instructions:

    1. Copy "CFE_MC67_NA_015604_WM_EN_v010100_e_WB.cab" file to the Application folder on the device.

    2. Deploy the solution by tapping on the "CFE_MC67_NA_015604_WM_EN_v010100_e_WB.cab" file.

    3. After successful deployment of the "CFE_MC67_NA_015604_WM_EN_v010100_e_WB.cab" file device will do an automatic warm boot.

SD Cards / Micro SD cards Installation Instructions:

    1. Copy "CFE_MC67_NA_015604_WM_EN_v010100_e_WB.cab" file to the SD card.

    2. Deploy the solution by tapping on the "CFE_MC67_NA_015604_WM_EN_v010100_e_WB.cab"

    3. After successful deployment of the "CFE_MC67_NA_015604_WM_EN_v010100_e_WB.cab" file device will do an automatic warm boot.

For MSP or REMOTE installation of the PATCH:

    1. Set up MDM (MSP, Soti, Airwatch, etc..) to send "CFE_MC67_NA_015604_WM_EN_v010100_e_NB.cab" file to the application folder of the device.

    2. To deploy the solution, setup in MDM to install the cab file "CFE_MC67_NA_015604_WM_EN_v010100_e_NB.cab" file.

    3. Changes will take effect after a manual reboot of the terminal or if MDM reboots device.

 

Release Date

February 19, 2016