Chat with us
Establishing connection, please wait while we connect you.

TC75 Operating System BSP 20.03 Non-GMS Release Notes


Work more efficiently and better serve your customers by giving your employees enterprise-class handheld computers that survive life in the field or shop floor, communicate and access information in real time.

The TC75 is the professional-grade Android device built from the ground up for the enterprise.

·       4G/LTE (TC75 only) and 8.02.11a/b/g/n connectivity for anywhere, anytime access to information

·       Zebra's Mobility Extensions (Mx)

·       Mobility DNA, a suite of mobility enabling applications, development tools and utilities

·       Most advanced scan engine with longer range date capture capability

·       Rugged and ready for every day enterprise use inside and outside the four walls


TC75 Lollipop REV A v20.03 with NON-GMS

Special Note:

·       Reboot after FactoryReset or EnterpriseReset will take a longer time than KitKat.

·       Lollipop has built in mechanism to update the scan firmware automatically.

·       Downgrade from Lollipop to KitKat through MSP is not supported.

-       Button_L1 (SCAN BTN) cannot be remapped with Recent Apps key.


Component Description and Version

Component / Description


Product Build Number


Android Version


Linux Kernel


Android SDK Level


Android security patch level


Platform (TI/MPA/ etc)

QC 8960 Pro

Flash Size


RAM Size


MSP Package




2.6 SimulScanEngine 1.13.6





OSX / Mx

OSX / MXMF version:





Touch FW

STYLUS-80_GLOVE-105, FW:1.2.AA



v06.54  / Service v06.54


Bluetooth Pairing Utility



File Browser

Ver 1.17

Stage Now

App Gallery


Tech Docs





NFC_NCIHAL_AR3.5.0_Lollipop, FW:122

Sensors (Accel, Gyro, Light, Prox)

1, 1, 1, 1


CAM-FRONT-1.0.0  CAM-REAR-1.0.0




12.2.0. Build 23469




Qualcomm RIL 1.0







NFC Payment Manger



App:1.00 build 3/Service: 1.00 build 1/Firmware:1.00 build 4

Battery Manger







Full Software Update

Enterprise Reset - Wipes all partitions/data except Enterprise folder/partition & On Device Storage (/sdcard)

Factory Reset - Wipes all partitions/folders including enterprise but except On Device Storage (/sdcard)


Used by MSP/AW – Full Package update


Used by MSP/AW – Enterprise reset


Used by MSP/AW – Factory reset


Device Compatibility

This software release has been approved for use with the following Symbol devices.


Operating System


Android 4.4.3, Android 5.1.1


Android 4.4.3, Android 5.1.1


Android 4.4.3, Android 5.1.1


Android 4.4.3, Android 5.1.1


Android 4.4.3, Android 5.1.1


Android 4.4.3, Android 5.1.1


Installation Requirements

This Software has to be used with compatible devices listed above. Internal SD Card should have 500 MB of free space.           

How to find the Internal SD card free Space? Here are the methods:

Method 1:

1.       Connect the device to a PC using Snap-on and allow the PC to access the device storage.

2.       Check the Free storage available in “Internal Storage”. Make sure the free storage is more than 500MB.

3.       Factory reset or Enterprise Reset can be performed to free up internal storage space.

Method 2:

1.       In the device, Open “Storage” under “Setting” menu and look for Available space under “Internal Storage” section (which has total space as 1GB).

2.       The Available memory should be more than 500MB.

3.       Factory reset or Enterprise Reset can be performed to free up internal storage space


Installation Instructions

1.     Plug the TC75 to the USB Cable and then the Cable to the PC.  If you have a Cradle with USB connectivity, connect it.

2.     You will be connected as a media device.

3.     Download following packages

    a. (Full Package Update v20.03)

    b. (Factory Reset Package v20.03)

    c. (Enterprise Reset Package v20.03)

4.     Now, copy the .zip files (and the Optional files too) to your TC75’s storage.

5.     You will need to put your device into Recovery Mode.

    a.      Hold the “Power Key” until “Reset” option appears and then release

    b.     Tap “Reset” and then immediately hold the “PTT Key” until recovery mode is initiated (Let go after you feel the vibration)

    c.      Once on the Recovery Screen, scroll down using “Volume Keys” +/- to the location where you copied the files and press the “PTT Key”

    d.     Follow same procedure and select the (the Full Package Update v20.03), with “PTT Key”

    e.      Upon completion, you will be back at the Recovery Mode screen.

    f.       Note:  Since Partition has changed, system by default will not backup user data partition.  To end user this is similar to Enterprise Reset.

    g.     Next step only if you are switching between GMS and NON-GMS software, otherwise this step is not required.

        ·        If you are updating device from GMS to NON-GMS or Vice Versa, it is required to either use (Factory Reset, this will give complete OOB experience) or at Minimum, please do a (Enterprise Reset).

    h.     If you are going to install the optional packages, then do so now with the same procedure used above.

    i.       Upon completion of all of the updates, you will be back at the Recovery Mode screen.  Select, “reboot system now” with the “PTT Key”, you will see it reboot, then you will see “Android is upgrading…” and then you will see the main screen, then

6.     Go to “Settings” and scroll down to “About phone” and look at the “Build number”.  It should end with “01-20-03-L-00-MV”. Now, you can start using the TC75, please manually set the date and time.  Go to “Settings” and scroll down to “Date & time” and set the correct Date/Time by un-checking “Automatic date & time” and “Automatic time zone” and then select “Select time zone”, “Set date”, “Set time” to set the desired values. Lastly, put check marks back in “Automatic date & time” and “Automatic time zone”.

7.     Now you are all set to use your updated TC75 with NON-GMS.

Changes and Fixes

  SPR fixes:

SPR Number



Video Capture fixed Duration does not take effect


HostMgr is not setting the hostname on device


Customer sees devices lock and wipe even though end user has not exhausted the maximum number of incorrect passwords on lock screen.


NPObject deleted error while using iframes in the html page


TC75 Key programmer configs are not consistently functional


TC75 device shows minor sluggishness when opening apps/navigating after Allowlist listing is applied


While deploying key-config.xml into device over the air it is not consumed on first try


Audio volume cannot be adjusted while PTT Pro is active on TC70/ TC75.

TC70 and TC75 with the 2.5MM headset dongle and standard Zebra PTT single ear headsets. When the headset is plugged in and PTT PRO is active, the volume keys do not make any effect.


Fixed The battery percent is shown incorrectly after doing a battery swap


Component Release Notes (only major features since last release):


Change Details

·       Added Support for SmartMU feature.

·       Fix for Fast Mschapv2 connection failures.

·       Resolves an issue where MU was unable to connect to 802.11k enabled WIFI profile

·       Resolves the issue where fusion logger page will either be left blank (in some cases) or it will not be updated on roaming to different BSSID's (only observed for CCKM roam).

·       Resolves the issue where after Long press on connected profile to select modify network option and if we select advanced options, it should display the previous proxy auto config details as we configured before. It was failing update that info.

·       Resolves the issue where DhcpInfo is not properly updating when gateway is disabled

·       Resolves the issue where Mac Address is not displaying in Fusion Status

·       Pre-Certification requirement to pass P2P power save test cases. Fix provided to enable P2P Power Save

·       Fix for reducing the connection time delays.

·       Fix for PNO (Preferred Network Offloading) when only DFS channels are enabled. On suspending the device, Host driver offloads the network info to firmware for handling scan operations.


SPR Fixes

·        SPR 29965 changes Porting into prima



Wireless LAN Radio


Data Rates

5GHz: 802.11a/n — up to 150 Mbps
2.4GHz: 802.11b/g/n — up to 72.2 Mbps

Operating Channels

Chan 36 - 165 (5180 - 5825 MHz); Chan 1 - 13 (2412 - 2472 MHz); Actual operating channels/frequencies depend on regulatory rules and certification agency

Security and Encryption


Multimedia Wi-Fi Multimedia™



WFA (802.11n,WMM), WMM-PS, CCXv4, Wi-Fi Direct, WPS2.0

Fast Roam

PMKID caching, Cisco CCKM, OKC, 802.11r

Network Connections

Bluetooth; USB 2.0 OTG Host docking interface; 802.11r and 802.11k for enterprise voice roaming included


Mx / OSX: QC.


Brief Description

Clear Clipboard

Clearing the data copied into clipboard

Enable/Disable Clipboard

Enable/Disable the clipboard features to cut/copy/paste

Factory Reset

Wipe - Data+Enterprise+Cache

Enterprise Reset

Wipe - Data+Cache

Full Device Wipe

Wipe - Data+Enterprise+Cache+InternalSD+External SD

Enable/Disable Enterprise Reset in Settings App

API to Enable/Disable the Enterprise Reset UI in Settings Application

Display OSX Version

OSX version can be seen in Settings => About Phone => SW Components => OSX version

Enable Disable AppInfo Access

Enabling and disabling , App info from settings

Allow/Disallow App to submit XML

Add/delete/query packages which are allowed to SubmitXML to MxMgtFw

Enable Disable UMS/PTP/MTP

MassStorage, MediaTransfer and PTP modes can be Blocked and Unblocked

Enable Disable External USB Storage

 Enable/Disable Mounting of External USB Pen-drive storage with device

Enable/Disable Browser

Enable/Disable Native Browser Address Bar

Enable/Disable access to Applications Section of Settings UI

Hide Apps section of Settings Application

Initiate NTP Sync

Enable/Disable/Initiate NTP

Ethernet Settings

Enable/Disable & TurnOn/TurnOff

Enable/Disable Use of Background Data

Enable/Disable Background data in SIM devices

Auto Correction

Enable/Disable the ability of auto correction of words in soft keyboard


Enable/Disable Wi-Fi


Enable/Disable WWAN

Safe Mode

Enable/Disable Safe mode

Unknown sources

Enable/Disable Unknown sources UI

Enable/Disable Home Key

Enable/Disable Home Key

BT Pairing Pop up

Enable/Disable BT pairing pop up

SD card Usage

Enable/Disable SD card Usage

Enable/Disable Power button instantly lock

Enable/Disable Power button instantly lock UI

Turn On/Off Power button instantly lock

Turn On/Off Power button instantly lock

Enable Disable Airplane mode

Enable/Disable Airplane mode UI

Turn On/Off Airplane Mode

Turn On/Off Airplane Mode

Enable/Disable Power button menu items

Enable/Disable menu displayed when power button is long pressed

Hide/unhide Power button menu

Hide/Unhide menu displayed when power button is displayed

Enable/ Disables Settings Icon on Notification drag-down page

Enable/ Disables Settings Icon on Notification drag-down page

Turn On/Off Notification Bar (whether the bar shows and can be "pulled down")

Turn On/Off Notification Bar (whether the bar shows and can be "pulled down")


Scanning Framework Version:


·        Firmware and Decoder versions are now displayed in DW.

·        Support for DCA added.

·        Support for Picklist, LCD mode, AimTimer.

·       Support for Imaging APIs.

·        Support for scan Inverse Aztec barcodes.

·        Mail mark 09 decoder kit added

·        ImagerCamera support

·        Simulscan and Imaging through Scanning API

·        Added support for BT RS507 and camera scanning.




·        Two new actions to Advance data formatting actions namely "Remove characters" and "Stop remove chars". 

·        Wake on trigger support for RS429 pluggable scanner.

·        RS6000 support with new parameters.

·        Enhanced UI navigation performance.

·        Added pluggable serial SSI scanner connection disconnection notification support.




·        Add the raw barcode data to the ProcessedRegion ExtraData1 field (previously unused)

·        Prevent exception due to empty template path in SimulScanDemo LandingActivity

·        Unable to save manually modified data after scan capture in simulscan for "Structured_European.xml" Template.

·        Fix SS-191 - Remove flexiscript source from SimulScan default templates

·        ImgKit Update SS_6.6.5_CD_1.6.2_OCR_1.6.0.

·        OCR Engine update (v3.1.5)

·        Upgraded the OMR engine for BAXI form.

·        Add barcode detection for Freeform OCR to avoid recognizing a barcode as a string of "llllllll".

·        Modified SimulScanView to just extend RelativeLayout and the view/layout.




·        Enhanced the EMDKManager > ProfileManager to support simultaneous usage in multiple applications. Refer to the Usage Notes for a complete description and restriction on using this feature.

·        Added support for the MX v6.0 in the Profile Manager:

·        Clock

·        Added new feature to manage Auto Time Zone - whether to automatically acquire time zone from the network.

·        Added new feature to manage Military Time - whether to use Military (24 hour) time format.

·        Updated to allow Manual Time Zone setting when Auto Time is On.

·        Camera Manager - Some of the latest devices can now be used to take pictures using Imager. The Camera manager is enhanced to block the Imager from taking pictures.

·        Analytics Manager - Added new capability to enable or disable features such as File Upload, ANR (Application Not Respond) Info Collection, Ruggedness Info Collection, Feature Usage Info Collection, Restrict SelfUpdate Wi-Fi Only, Device Info Collection and custom feature.

·        Enhanced the Notification Manager APIs with the following features:

·        Added support for using the pluggable External Vibrator with WT6000 device. The earlier version of EMDK Notification Manager API supported only RS6000.

·        Enhanced the NotificationDevice class for canceling the active notifications on the remote device.

·        Enhanced the Password fields in the Profile Manager to accept special characters.

·        Added support for the MX v5.1 in the Profile Manager:

·        UI Manager                                                       

·        Added new feature to set the language to localize the device to match the preferred language of the intended Device User.

·        Added new feature to enable or disable pulling down the Notification Panel.

·        Added new feature to display or hide the Settings icon in the Notification Panel.

·        App Manager - Added new feature to launch an application by specifying the application name.

·        Host Manager - Added new feature to set the device host name to identify device both locally and within any DNS-enabled IP-based network.

·        Bluetooth Manager - Added new feature to allow or disallow the mobile device to pair with new remote devices.

·        Analytics Manager - Added new capability to control the data captured by the analytics engine such as data transportation, type of information to collect and data collection scheduling.

·        Updated Barcode Manager APIs with the following features.

·        Enhanced the ScannerInfo class for selecting the scanner:

·        Updated the DataCapture feature in the Profile Manager.

·        Added support for additional scanner devices:

·        Bluetooth Imager 1 (please note this value is for use with RS507 only)

·        Added support for controlling the barcode decode notifications:

·        Aim Mode - Enable/Disable scanner aim during scanning.

·        Illumination Brightness - Controls illumination brightness of the imager.

·        Added support for new WT6000 Lollipop (Android 5.1.1) devices along with RS4000 and RS6000 scanner support.

·        Added support for Notification APIs to send notifications to remote devices. This feature currently supports RS6000 only. The Notification APIs can be used for controlling following notifications:

·        Line Of Sight LED, Beeping & Vibration

·        Updated Barcode Manager APIs for the following features.

·        Added support for new pluggable scanner RS4000 to be used with WT6000 device

·        Added support for new Bluetooth Scanner RS6000 to be used with WT6000 device

·        Added new scanner configurations parameters in ScannerConfig.ScanParams

·        Added support for the MX v5.2 in the Profile Manager:

·        Added support for the following MX v4.4 features in the Profile Manager:

·        Updated DataCapture feature in the Profile Manager:

·        Added support for choosing the remote scanners such as RS507, RS4000 and RS6000. Following are the expected values:

·        Pluggable Laser 1

·        RS6000 Bluetooth Imager

·        Added support for controlling the barcode decode notifications:

·        Decode Audio Feedback Mode - Controls the Audio feedback mode to be given by the host device (WT6000) and remote scanner (RS6000) upon barcode decode.

·        Decode LED Feedback Mode - Controls the LED feedback mode to be given by the host device (WT6000) and remote scanner (RS6000) upon barcode decode.

·        The BarcodeSample1 has been modified to support WT6000 and new scanners (RS4000 and RS6000). Now it works with default/native device orientation. In WT6000, it is working in Landscape mode.




·        Added LTS plug-in support for Kernel logs

·        Added ‘per core cpu load’ feature in RxLogger main logs



·        Fixed the issue where the snapshot logs were not getting generated when one or few options are selected

·        Rectified main logs file name generated through LTS plug-in

·        Fixed the issue in backup now feature where it was getting disabled once main screen goes away




·        Push Notification

·        When a New Gallery is created a notification is sent to the devices which belong to the same organization.

·        When a App is added to a Gallery a notification is sent to the devices which contains the Gallery.

·        When a New User is added to a Gallery, a notification is sent to the device where the user has logged in.

·        DataFile Configuration

·        Allows multiple file to be uploaded for a single app.

·        Also Configuration file can be changed, while adding to the app to Gallery from showcase.

·        Silent Install

·        Apps get installed silently when AG is closed based on force install settings.  

·        Updates App silently when AG is closed.                

·        Push AppGallery configurations silently to the device.

·        Scan To Stage

·        Allows user to scan a Barcode and login to AppGallery.

·        Allows Org Admin to share the Gallery easily to all the users.

·        Applicable only on Zebra Devices.

·        Showcase Edit Functionality

·        Option to Update most of the info present in showcase without adding a new version


Known problems and suggested workarounds:



It is taking around 2-3 min to apply the updates. Update progress is not shown.

After clicking on “update” button wait for 2-3 min. For the update to come

Opening app after self-update will logout the user.

User has to login again with his credentials.

[AGM/AGE]AppGallery client app doesn’t sync using proxy network

Use AppGallery with open network.



Part Number and Release Date

Part Numbers







October 04, 2016