Workabout Pro 4 WEH Operating System BSP 3.0 Release Notes
The Workabout Pro 4 is a modular, industrial hand held computer. Microsoft Windows CE Professional 6 is one of the two OS options for this device.
Improvements in the OS release:
- Update to Fusion version (2.02.0.0.023R)
- FIPS 140-2 Level 1 Compliant
- SHA2 Certificate support
- Update WWAN network name list to GSMA TS.25 version July13_2015
- Update GPRS operator database
- Update translations in some control panel applets (Compass, Notify)
7528 Windows Embedded Handheld 6.5.3 OS Image v3.0
This software release has been approved for use with the following Symbol devices.
Workabout Pro 4 (7528)
Windows Embedded Handheld 6.5.3
If previously installed, uninstall '7528 Release 2.3 OS Patch v1.1'.
To uninstall 7528 Release 2.3 OS Patch v1.1, follow the procedure below:
Delete contents of \Application\tiinit folder.
- Clean start device or update operating system software.
To update the operating system software of the WAP 4, follow the procedure below:
If previously installed, uninstall '7528 Release 2.3 OS Patch v1.1' (Instructions above).
The firmware can be upgraded using a USB Memory Stick or using a microSD Card.
The firmware file must be renamed 7528os.img
Copy the file containing the firmware upgrade to the root directory of the USB memory stick or Micro SD card
Install the USB memory stick into the docking cradle or install the Micro SD card into the WAP 4 in the Micro SD slot in the battery compartment
Press and hold down the [Blue FN] key, the [SCAN] key and the [Power] key, simultaneously for a minimum of six seconds.
When the update is complete, the device reboots to the main operating system.
Remove the MicroSD card from the device to prevent the device from performing the upgrade process again on the next cold boot, and then disconnect external power. The device is now ready to be used.
Install add-on cab file.
Part Number and Release Date
January 15, 2016