MC31 CE 6.0 - BSP v06.37.13 - HotFix CFE v01.04.00 Release Notes

Introduction

HotFix CFE (Cumulative Fixes from Engineering) Package contains multiple SPR Hotfixes into a single package. The HotFix CFE Package helps the end users to keep up to date with all the SPR hotfixes for given product software release / revision.

HotFix CFE packages are validated only by engineering validation team and the package follows Zebra Technologies HotFix Package Policy. Click here to view HotFix Package Policy.

Description

CFE package CFE_MC31_CE_063713_EN_v010400_e_WB.cab / CFE_MC31_CE_063713_EN_v010400_e_NB.cab file includes the following HotFixes:

 SPR No

Synopsis

32201

Internet Explorer Encoding is missing on device

30203

Device does not resume after 2 times of suspending the device

27221

Device does not scan QR barcode

28458

Device does not resume from suspend mode by pressing power button during customer application running. SDIO patch with latest Fusion resolves this issue.

This SPR fix corrects the following SPR issues.

  • SPR 23692 - Fusion radio unavailable when resuming after several suspends.
  • SPR 26402 - Device Fusion/WIFI adapter keep on resetting after connect to WIFI and placed in cradle

 

This HotFix CFE package CFE_MC31_CE_063713_EN_v010400_e_WB.cab /  CFE_MC31_CE_063713_EN_v010400_e_NB.cab obsoletes the following HotFix CFEs: 

HotFix CFE version

Product

CFE_MC31_CE_063713_EN_v010300_e_WB.cab

CFE_MC31_CE_063713_EN_v010300_e_NB.cab

CFE_MC31_CE_063713_EN_v010200_e_WB.cab

CFE_MC31_CE_063713_EN_v010200_e_NB.cab

CFE_MC31_CE_063713_EN_v010100_e.cab

MC3190

Note: Latest CFE package includes previous CFE package hot fixes and new SPR hotfix.

Package Details

CFE_MC31_CE_063713_EN_v010400_e_WB.cab (CFE package with auto Warm boot)

CFE_MC31_CE_063713_EN_v010400_e_NB.cab (CFE package without auto Warm boot)

Device Compatibility

This HotFix CFE Package software release has been approved for use with the following Zebra devices.

Device

Operating System

BSP Version

MC31

CE 6.0

v06.37.13

 

Installation Requirements

The HotFix CFE cab can be deployed to the Mobile device through any one of the below mentioned methods. For installing the cab, the users should have at least one of the below mentioned tools.

  • Windows Mobile Device Center (For Windows Desktops)
  • SD Cards / Micro SD cards
  • MDM set up

Installation Instructions

For Normal installation of the PATCH:

·        Windows Mobile Device Center (For Windows Desktops) Installation Instructions:

    1. Copy "CFE_MC31_CE_063713_EN_v010400_e_WB.cab" file to the Application folder on the device.

    2. Deploy the solution by tapping on the "CFE_MC31_CE_063713_EN_v010400_e_WB.cab" file.

    3. After successful deployment of the "CFE_MC31_CE_063713_EN_v010400_e_WB.cab" file, device will do an automatic warm boot.

·        SD Cards / Micro SD cards Installation Instructions:

    1. Copy "CFE_MC31_CE_063713_EN_v010400_e_WB.cab" file to the SD card.

    2. Deploy the solution by tapping on the "CFE_MC31_CE_063713_EN_v010400_e_WB.cab"

    3. After successful deployment of the "CFE_MC31_CE_063713_EN_v010400_e_WB.cab" file, device will do an automatic warm boot.

For MSP or REMOTE installation of the PATCH:

1. Set up MDM (MSP, Soti, Airwatch, etc..) to send "CFE_MC31_CE_063713_EN_v010400_e_NB.cab" file to the application folder of the device.

2. To deploy the solution, setup in MDM to install the cab file “CFE_MC31_CE_063713_EN_v010400_e_NB.cab" file.

3. Changes will take effect after a manual reboot of the terminal or if MDM reboots device.

 

Part Number and Release Date

June, 2017