Chat with us
Establishing connection, please wait while we connect you.

MC40 Operating System Non-Voice BSP 04.11.0610 - Update Loader Image Release notes


Today, it’s important to provide an experience that will impress demanding and technology savvy customers and end-users. The MC40N0 Mobile Computer is a sleek, customizable device that puts all the needed information at the customers’ fingertips.

With an MC40N0, they can scan an item bar code to look up price, inventory availability or item location; ring up the sale; look up product information or a gift registry; present a comparison of multiple products; call others in the store for help with a question; and even complete a loyalty card application — anywhere in the store, without ever leaving the customer. The MC40N0 offers technology with an impressive look that can be customized in almost limitless ways to become an extension of your brand. 

Recovery update package v04.11.0610 (Build Date 061016) contains the software required to update an MC40N0 Non-Voice SKU device to JellyBean OS.

This software is intended to be loaded and run on the MC40N0 Non-Voice SKU devices. It is important that care be taken to match the device configuration with the appropriate Recovery update package. If an incorrect Recovery update package is loaded, the device may not boot.


  • JellyBean 4.1.1
  • Kernel v3.0.31
  • MX 3.5.1-1
  • MSP v7.08.67

General Enhancements / Fixes Included:

  • SPR29135 ­ Resolved an issue wherein android stops querying for the signal strength when the screen goes off.
  • Toshiba A15nm eMMC support added.
  • New TPK GFF Touch Panel support added.
  • Added BackRev prevention support to avoid earlier OS images to be flashed on MC40 HW with TPK v2.0 Touch Panel
  • Touch Firmware for TPK OGS panel is updated to version 37, which improves touch performance on hard press


  1. – JellyBean OS Recovery update package
  2. M40N0JXX0AUxx40610.apf – JellyBean OS AirBEAM update package
  3. – Gingerbread to JellyBean OS upgrade Recovery update package
  4. M40N0JXX0AGxx40610.apf – Gingerbread to JellyBean OS upgrade AirBEAM update package

Device Compatibility

This software release has been approved for use with the following devices.

Device P/N

Operating System


JellyBean 4.1.1



























Installation Requirements

1) The Software update requires Non-Voice SKU hardware device

2) Enterprise Reset and Factory Reset package files are available on the MC40 Software Download section on Support Central

Installation Instructions

1. OS Recovery Update Package

    a. Connect the USB cable from your PC to the device

    b. Make sure MTP mode is selected in the USB settings in the device and MTP drivers are installed in your PC

    c. The internal SD card of MC40 will be seen in your PC as mounted drive MC40N0.

    d. Copy the recovery update zip file to the root folder on internal SD card

    e. Press and hold the Power button on the device until the Device options menu appears

    f. Tap on Reset to reboot the device

    g. When the device is rebooting hold the left Scan/Action button to enter Recovery update mode

    h. When the Recovery Mode home screen (Android logo) appears then release the left Scan/Action button.

    i. Touch Home button to enter Recovery menu screen

    j. Click on Vol+ or Vol­- to navigate to the "apply update from sdcard" option

    k. Click on on PTT key to select the option

    l. Click on Vol+ or Vol­- to navigate to the recovery update zip file

    m. Click on on PTT key to select the recovery update zip file

    n. Click on Vol+ or Vol­- to navigate “reboot system now” and Click on PTT key to reboot the device

2. OS AirBEAM Update package

    a. Please refer Mobility Service Platform deployment guide for instruction.

Note: Battery must be 30% charged to perform update

Important Notes

1. Downgrade to  JB RevB v02.08.0520 (Build Date 052014) SW Release or earlier releases is not supported on RevB Plus Hardware which contains Giant Plus Display, Liyi or TPK Touch Panel. To find out whether the device is a RevB Plus Hardware, Go to Settings­>About Device­>Hardware config­>Display and Check name of the Display. If Display name is shown as "GiantPlus GPM1517A0", it is a RevB Plus Hardware.

2. Downgrade to JB RevC SW v02.10.0807 (Build Date 080715) SW Release or earlier releases is not supported on RevB Plus Hardware which contains TPK GFF Touch Panel. To find out whether the device is a RevB Plus Hardware with TPK GFF, Go to Settings­>About device­>Hardware config­>Touch and Check name of the Touch Panel. If Touch Panel name is shown as "Focaltech FT5X46_GFF", it is a RevB Plus Hardware with TPK GFF. 

Part Number and Release Date

  1. M40N0JXX0RUxx40610
  2. M40N0JXX0AUxx40610
  3. M40N0JXX0RGxx40610
  4. M40N0JXX0AGxx40610

June 22, 2016