General Enhancements and Fixes:
Microsoft Windows Embedded Handheld 6.5 Professional (Build 29040.5.3.12)
Updated WLAN Fusion Software v3.00.2.0.0019R
MSP Agent v7.03.58, Airbeam v7.03.58, RD Client 7.03.58.This software release has been tested on MSP3.3 and passed MSP compliance.
Included Team Express Client Licenced Version v 1.1.23-1102 as CAB file
Included MMAX Demo v5.0.12
Included DataWedge v3.3.19 as Cab file.
RIL - v3.25
SPR 19650: Incorrect smart Battery part Number reported via EMDK API
SPR 19313: The registry key to prevent the SD card from un-mounting when removing the battery does not work correctly
SPR 19345: Application launched with Startup.exe will get closed as soon as it launches.
SPR 18796: DUT failed to scan barcodes with 50 characters.
Support for Unified MSR driver: Unified MSR driver, abstracts out the HW layer, so that one single (unified) DLL could be used for all of the MSR devices.
Config Tab dynamically populated with OS version WM6.1 or WM6.5
Added ability to suppress the pairing dialog box that shows up when using SS stack.
Audio driver is modified to improve the audio quality during VOIP.
Audio Registry changes to have general/default audio settings and to prevent overriding of speaker.
Keyboard driver contains fixes for shift key set.
Features / Fixes in Camera / Scanner & Imager:
Improvements to DPM datamatrix codes with new Pixdll 5.14.09.02.
Long range imager calibration for reading reflective barcodes at 30feet distance fixed.
Added coupon report mode, which enable user to read old, interim and new coupon types. Also added new UPC/EAN param for selecting coupon report mode.
Added support for LCD mode with new reader param for LCD mode. LCD mode is supported only for SE4500 RevB engines.
Provided New Pixdll.dll for following features:
Features / Fixes in WWAN:
WLAN - Fusion Release Notes v3.00.2.0.0019R:
SPR 20440: Correct issue where authentication would occasionally fail after cold boot.
SPR 19274: Fixed an issue where the WLAN radio would occasionally reset during high volume data transfers.
Fixed an issue where Wireless Status application displays an empty message box if WLAN is disabled via Microsoft SCMDM.
Fixed an issue where FIPS 140-2 self test would fail.
Added the user certificate hash override feature [Fusion API enhancement]
Regulatory update – 5GHZ restriction in Taiwan.
Fixes and Known Issues in MSP Agent v7.03.58:
“For MSP release notes, see Zebra.com and refer to the Release Notes document for the latest MSP release.”
Known Issues in Windows Mobile Products:
Remove the below registry entry and reboot, to display the "Input" applet under Settings\Personal page
"Redirect"="" which is present in the following section:
Known Issues in Platform:
After team express installation, device takes 3 minutes to suspend.
“GettingStarted” entry has been removed from the Titanium screen. After a cold/warm boot, “GettingStarted” icon position will be moved lower in Start->Programs.
“Datawedge” will not be installed on Cleanboot hence Titanium Screen would not have Datawedge entry for all terminals. However, Datawedge.cab is available in \Windows folder for the user to install. After installation, user can find Datawedge shortcut on the Titanium screen.
If the user wants to install DataWedge at Clean Boot, then the following registry key should be put in .reg file and placed in \Application folder and then the terminal should be clean booted.
MC75A8 Specific Features/Fixes:
Fixed an issue where, device continues to vibrate even after suspending the device during VOIP call.
SPR 20240: Serial communication at baud of 2400 (or 1200) does not work correctly.
SPR 20340: While using MSR7000, “bad read” data is getting buffered and is sent along with a subsequent good reads. End user is getting buffered data from the MSR7000 from previous reads when swiping a credit card.
SPR 20373:Neither clean and blank nor reflash OS resets Application folder. If the airbeam/MSP folders are deleted from /Application folder and OS image update is done, these folders are not replaced back.This fix is used to replace back the folders
SPR 19354: Auto focus issue- Pictures are blurry when printed out.
Support for QWERTZ key pad configuration.
MC75A8 Specific Known Issues:
After Standard Update Procedure to BSP37 or later, Application folder contents are not clearing for MC75Ax devices,this happens while upgrading to BSP37 or later. If Application partition needs to be cleaned, modify the pkgs.lst to include this entry 75A8w65HenCA000001.bin
Default Team Express Private call key is not mapped to center trigger key on MC75Ax devices.
GPS program port set to COM8 and Hardware port to COM2. So COM2 will not be available for the user/3rd party applications in MC75A6/MC75A8.