MC9596 Operating System BSP 06.47.12 - Hotfix CFE 01.01.00 Release Notes

Introduction

HotFix CFE (Cumulative Fixes from Engineering) Package includes multiple SPR Hotfixes contained into a single package. The HotFix CFE Package helps the end users to keep up to date with all the SPR hotfixes for given product software release / revision. 

HotFix CFE packages are validated only by engineering validation team and the package follows ZebraTechnologies HotFix Package Policy. Click here to view HotFix Package Policy. HotFix Support Policy 

 

Description

The content and related Hotfix included in this HotFix CFE_MC9596_WM_064712_EN_v010100_e_WB.cab/CFE_MC9596_WM_064712_EN_v010100_e_NB.cab is as follows.

 

SPR

No

 

Synopsis

 

 

28401

Device Fusion/WIFI adapter Keep on resetting after connect to WIFI and placed in cradle.

 

This fix also corrects the SPR 25317 and SPR 26402.

 

Note: For SPR 28401

  • This is a SDIO patch and needs to be installed with Latest Fusion(37R or onwards).
  • Prior to installation, ensure that you are currently running an approved version of the Operating System from the table above. Otherwise, visit https://portal.motorolasolutions.com/Support/US­EN and load the correct DCP for your product. This installation contains DHCP.dll which includes DHCP client having fixes for few SPRs. This is required if this cab is installed on any older OEM version.

Package Details

CFE_MC9596_WM_064712_EN_v010100_e_NB.cab (CFE package without Warm boot) CFE_MC9596_WM_064712_EN_v010100_e_WB.cab (CFE package with Warm boot)

Device Compatibility

This HotFix CFE Package software release has been approved for use with the following Zebra devices.

Device

Operating System

BSP Version

MC9596

WM6.5

v06.47.12

Installation Requirements

The HotFix CFE cab can be deployed to the Mobile device through any one of the below mentioned methods. For installing the cab, the users should have at least one of the below mentioned tools.

  • Windows Mobile Device Center (For Windows Desktops)
  • SD Cards / Micro SD cards
  • MDM set up

Installation Instructions

 

Windows Mobile Device Center (For Windows Desktops) Installation Instructions:

1.  Copy "CFE_MC9596_WM_064712_EN_v010100_e_WB.cab" file to the Application folder on the device.

2.  Deploy the solution by tapping on the "CFE_MC9596_WM_064712_EN_v010100_e_WB.cab" file.

3.   After successful deployment of the "CFE_MC9596_WM_064712_EN_v010100_e_WB.cab" file, device will do an automatic warm boot.

 

SD Cards / Micro SD cards Installation Instructions:

1.   Copy "CFE_MC9596_WM_064712_EN_v010100_e_WB.cab" file to the SD card.

2.   Deploy the solution by tapping on the "CFE_MC9596_WM_064712_EN_v010100_e_WB.cab"

3.   After successful deployment of the "CFE_MC9596_WM_064712_EN_v010100_e_WB.cab" file, device will do an automatic warm boot.

 

For MSP or REMOTE installation of the PATCH:

1.  Set up MDM (MSP, Soti, Airwatch, etc..) to send "CFE_MC9596_WM_064712_EN_v010100_e_NB.cab" file to the application folder of the device.

2.  To deploy the solution, setup in MDM to install the cab file "CFE_MC9596_WM_064712_EN_v010100_e_NB.cab" file.

3.  Changes will take effect after a manual reboot of the terminal or if MDM reboots device.

Release Date

January, 2016