VC70 CE 7.0 - BSP v05.57.03 - HotFix CFE v02.06.00 Package Release Notes
Introduction
HotFix CFE (Cumulative Fixes from Engineering) Package contains multiple SPR Hotfixes into a single package. The HotFix CFE Package helps the end users to keep up to date with all the SPR hotfixes for given product software release / revision.
HotFix CFE packages are validated only by engineering validation team and the package follows Zebra Technologies HotFix Package Policy. Click here to view HotFix Package Policy.
Description
CFE package CFE_VC70_CE_055703_EN_v020600_e_WB.cab/CFE_VC70_CE_055703_EN_v020600_e_NB.cab file includes the following HotFixes:
SPR No | Synopsis |
---|---|
31278 | Stylus right click and double click in Remote Desktop doesn't work |
30676 | When opening a Multi-File Playlist in windows Media Player, first file is opened and played and when next file is attempted to be opened / played Windows Media Player closes/disappears |
29193 | Audio dropout when using Bluetooth Audio (WBA) headset |
30681 | DataWedge is not turning to ready state when DS3608 scanner connected to VC70 in SSI mode. |
30742 | Sometimes the audio is not routed BT Headset or audio is not recorded through microphone when HS3000 BT Headset connected/disconnected several times manually |
29685 | RDP connection bar scatter when we scroll in RDP session. |
This HotFix CFE package CFE_VC70_CE_055703_EN_v020600_e_WB.cab / CFE_VC70_CE_055703_EN_v020600_e_NB.cab obsoletes the following HotFix CFEs:
HotFix CFE version |
---|
CFE_VC70_CE_055703_EN_v010301_e_WB.cab CFE_VC70_CE_055703_EN_v010301_e_NB.cab |
Note: Latest CFE package includes previous CFE package hot fixes and new SPR hot fix.
Package Details
CFE_VC70_CE_055703_EN_v020600_e_WB.cab (CFE package with auto Warm boot)
CFE_VC70_CE_055703_EN_v020600_e_NB.cab (CFE package without auto Warm boot)
Device Compatibility
This HotFix CFE Package software release has been approved for use with the following Zebra devices.
Device | Operating System | BSP Version |
---|---|---|
VC70 | CE 7.0 | v05.57.03 |
Installation Requirements
The HotFix CFE cab can be deployed to the Mobile device through any one of the below mentioned methods. For installing the cab, the users should have at least one of the below mentioned tools.
• Windows Mobile Device Center (For Windows Desktops)
• SD Cards / Micro SD cards
• MDM Set up
Installation Instructions
For Normal installation of the PATCH:
• Windows Mobile Device Center Installation Instructions:
1. Copy "CFE_VC70_CE_055703_EN_v020600_e_WB.cab" file to the Application folder on the device.
2. Deploy the solution by tapping on the "CFE_VC70_CE_055703_EN_v020600_e_WB.cab" file.
3. After successful deployment of the "CFE_VC70_CE_055703_EN_v020600_e_WB.cab" file device will do an automatic warm boot.
• SD Cards / Micro SD cards Installation Instructions:
1. Copy "CFE_VC70_CE_055703_EN_v020600_e_WB.cab" file to the SD card.
2. Deploy the solution by tapping on the "CFE_VC70_CE_055703_EN_v020600_e_WB.cab".
3. After successful deployment of the "CFE_VC70_CE_055703_EN_v020600_e_WB.cab" file device will do an automatic warm boot.
For MSP or REMOTE installation of the PATCH:
1. Set up MDM (MSP, Soti, Airwatch, etc..) to send "CFE_VC70_CE_055703_EN_v020600_e_NB.cab" file to the application folder of the device.
2. To deploy the solution, setup in MDM to install the cab file "CFE_VC70_CE_055703_EN_v020600_e_NB.cab" file.
3. Changes will take effect after a manual reboot of the terminal or if MDM reboots device.
Release Date
February, 2017