WT41N0 CE 7.0 - BSP v04.57.05 - HotFix CFE v01.05.00 Package Release Notes

Introduction

HotFix CFE (Cumulative Fixes from Engineering) Package contains multiple SPR Hotfixes into a single package. The HotFix CFE Package helps the end users to keep up to date with all the SPR hotfixes for given product software release / revision. 

HotFix CFE packages are validated only by engineering validation team and the package follows Zebra Technologies HotFix Package Policy. Click here to view HotFix Package Policy. HotFix Support Policy

Description

CFE package CFE_WT41_CE_045705_EN_v010500_e_WB.cab / CFE_WT41_CE_045705_EN_v010500_e_NB.cab file includes the following HotFixes:

 SPR No 

Synopsis

30384

Does not disable an illumination on RS507 through corded adapter or bluetooth when connected to the device.

30742

Sometimes the audio is not routed BT Headset or audio is not recorded through microphone when HS3000 BT Headset connected/disconnected several times manually

30339

Device platform is not supported when using Slovenia language

28945

Can't add Printer to Remote Desktop Client.

28818 / 27756

Device is Crashing/Freezing inside the cradle at times. Recovery is via a cold boot only.

 

This HotFix CFE package CFE_WT41_CE_045705_EN_v010500_e_WB.cab/CFE_WT41_CE_045705_EN_v010500_e_NB.cab obsoletes the following HotFix CFEs: 

HotFix CFE version

CFE_WT41_CE_045705_EN_v010200_e_WB.cab
CFE_WT41_CE_045705_EN_v010200_e_NB.cab

CFE_WT41_CE_045705_EN_v010200_e_WB.cab
CFE_WT41_CE_045705_EN_v010200_e_NB.cab

CFE_WT41_CE_045705_EN_v010400_e_WB.cab

CFE_WT41_CE_045705_EN_v010400_e_NB.cab 

Package Details

CFE_WT41_CE_045705_EN_v010500_e_WB.cab (CFE package with auto Warm boot)

CFE_WT41_CE_045705_EN_v010500_NB.cab (CFE package without auto Warm boot)

Device Compatibility

This HotFix CFE Package software release has been approved for use with the following Zebra devices.

Device

Operating System

BSP Version

WT41N0

CE 7.0

v04.57.04/v04.57.05

Installation Requirements

The HotFix CFE cab can be deployed to the Mobile device through any one of the below mentioned methods. For installing the cab, the users should have at least one of the below mentioned tools.

- Windows Mobile Device Center (For Windows Desktops)
- SD Cards / Micro SD cards
- MDM set up

Installation Instructions

For Normal installation of the PATCH:

Windows Mobile Device Center (For Windows Desktops) Installation Instructions:

    1.     Copy "CFE_WT41_CE_045705_EN_v010500_e_WB.cab" file to the Application folder on the device.
    2.     Deploy the solution by tapping on the "CFE_WT41_CE_045705_EN_v010500_e_WB.cab" file.
    3.    After successful deployment of the "CFE_WT41_CE_045705_EN_v010500_e_WB.cab" file, device will do an automatic warm boot.\

SD Cards / Micro SD cards Installation Instructions:

    1.     Copy "CFE_WT41_CE_045705_EN_v010500_e_WB.cab" file to the SD card.
    2.     Deploy the solution by tapping on the "CFE_WT41_CE_045705_EN_v010500_e_WB.cab".
    3.  After successful deployment of the "CFE_WT41_CE_045705_EN_v010500_e_WB.cab" file, device will do an automatic warm boot.

For MSP or REMOTE installation of the PATCH:

    1.     Set up MDM (MSP, Soti, Airwatch, etc..) to send "CFE_WT41_CE_045705_EN_v010500_e_NB.cab" file to the application folder of the device.
    2.     To deploy the solution, setup in MDM to install the cab file "CFE_WT41_CE_045705_EN_v010500_e_NB.cab" file.
    3.     Changes will take effect after a manual reboot of the terminal or if MDM reboots device.

Release Date

January, 2017