Defaulting the Zebra G-Series Printer Configurations and Network Settings To Factory Values

Article ID: 41681970

Details


 

Topic or Information

How do I set the printer back to factory defaults
How do I default the network settings

Applies To

GK Series, GX Series, GC Series Printers, GT Series Printers

Details

There are several methods used to default the printer and the network settings.

Defaulting the Printer to Factory Settings
Procedure
Method 1 - Press and hold the FEED button until there are four flashes. Release the button and the Status light will turn Amber for 3 seconds. The printer will load the factory settings.

Method 2 - Use the Zebra Setup Utility to send the following ZPL string ^XA^JUF^XZ

Defaulting the Printer Network Settings
Procedure
Method 1 Press and hold the FEED button until there are four flashes. Release the button and when the Status Light turns Amber press and hold the FEED button for one flash and release. The printer will default the Network Settings.

Method 2 - Use the Zebra Setup Utility to send the following ZPL string ^XA^JUN^XZ

Defaulting G-Series Network Settings Document Read More>>

 

Additional Information

Using the Zebra Setup Utility to send commands and receive data. Read More>>