Issue / Question
LI3678 / DS3678 is failing to reconnect to the host after swapping the scanner battery
Pairing reconnect is failing with Host and requires to remove LI3678 / DS3678 from paired scanner list in the host each time after scanner battery swap or removal
Applicable To
DS3678, LI3678
Resolution / Answer
Upgrade the scanner firmware to latest version using 123Scan2
The issue will be resolved with Firmware CAACKS00-004-R01 and above :
* Added BT save connection and feature to connect to last known device by a double trigger pull
Note: a Double trigger pull will also allow the scanner to reconnect to last paired/connected host .