Display Stuck in FastBoot Mode

Article ID: 18537491

Issue / Question

TC8000 Stuck in Fastboot screen

Applicable To


Resolution / Answer

The TC8000 may be in Fastboot mode either because it was manually or inadvertently booted into Fastboot mode or a hardware failure preventing the TC8000 from booting up

To exit Fastboot mode perform a Hard Reset of the TC8000

Simultaneously press and hold the Power Button + Scanner Trigger + PTT button (below Scnner trigger) for five seconds.

When the TC8000 begins to reboot release the buttons

If the TC8000 still boots into Fastboot mode repeatedly this may be a hardware issue.  Please contact Customer Support 

+ Applicable Products

  • TC8000