Enable Vibration after scan or Haptic Feedback

Article ID: 25510793

Issue / Question

How to Enable Vibration after scan or Haptic Feedback in Datawedge

Applicable To

TC2X , TC5X , TC7X, MC93 , MC92

Resolution / Answer

Procedure:

  1. Go to Datawedge
  2. Go into Profile setting
  3. Click Scan params in Barcode input section
  4. Check Decode Haptic Feedback

+ Applicable Products

  • MC9200 Mobile Computer
  • MC9300 Mobile Computer
  • TC20
  • TC25
  • TC51
  • TC51-HC Mobile Computer
  • TC52 Touch Computer
  • TC56
  • TC57 Touch Computer
  • TC70x
  • TC72 Touch Computer
  • TC75
  • TC75x
  • TC77 Touch Computer
  • TC8000