Removal Notice: BSP 01.01.49 LifeGuard 15, 17, 18 Updates

Article ID: 10975027

Issue / Question

Zebra has removed the following updates from the website:
LifeGuard Updates 15, 17 and 18 for BSP 01.01.49/Nougat operating system.

Based on a small number of customer reports, firmware updates can be inadvertently interrupted when one of these LifeGuard updates is newly applied or downgraded from a previous update. While this has occurred in only a small number of cases, interruption of a firmware update can leave a scanner unusable. Therefore, we are removing the updates until a corrected version is available.

Applicable To

TC51 TC56 TC70x TC75x MC33 MC33R VC80x
BSP Affected: 01.01.49
Operating System Affected: Nougat

Resolution / Answer

BSP Affected: LifeGuard Updates 15, 17 and 18 for BSP 01.01.49/Nougat operating system

Operating System Affected: Nougat

Devices Affected:

  • TC51
  • TC56
  • TC70x
  • TC75x
  • MC33
  • MC33R
  • VC80x

This issue may occur immediately following:

  • An update to Nougat LifeGuard 18 from Nougat LifeGuard 15 or 17
  • A downgrade from Nougat LifeGuard 18 to Nougat LifeGuard 15 or 17
  • A downgrade from an Oreo operating system to Nougat LifeGuard 15, 17 or 18

If you have already updated to one of these versions and your scanner works, there is no issue with remaining on that LifeGuard version. 

Please contact support if you have experienced this issue and need assistance. 

Updated Release

The scanner issue has been rectified in LifeGuard Update 19 for BSP 01.01.49 Nougat operating system.

More info: https://www.zebra.com/us/en/support-downloads/software/operating-system/scanner-firmware-issue.html

+ Applicable Products

  • MC3300
  • MC3330R
  • MC3390R
  • TC51
  • TC51-HC Mobile Computer
  • TC56
  • TC70x
  • TC75x
  • VC80X