Issue / Question
Making Static IP Persistent on WinCE7
Applicable To
WinCE7
Resolution / Answer
NOTE: Minimum Requirement : BSP 03.54.02
To set a static IP on Windows CE7, do not use the control panel where Windows manages the IP, it will not persist automatically.
For persistence, Fusion is recommended
Steps
1. Open Fusion, choose Find WLAN > Choose your desired SSID > Create Profile
2. Next
3. Next
4. Select different security type authentication if required if not, Next
5. Next
6. Select Passphrase (HEX only if applicable)
7. Key in the Wifi Password
8. Uncheck 'Obtain Device IP Address Automatically'
9. Next
10. Enter your Desired IP, Subnet & Gateway
11. Next
12. Save