ICS 16.0 Flowchart
Article ID: 65307635
Topic or Information
When to install ICS 16.0?
Applies To
Omnii, EP10, Neo, Ikôn, Workabout Pro 3 (7527), 7535 G2 and 7530 G2
Intermec EA20x and EA11
HHP 5X00 and 5X80
Details
Note:
EP10: ICS is included in the add-on CAB (aka Psion Software Advantage) since standard HW configuration includes the Color Camera
Omnii and WAP3: Decoder library not required since the installed HHP 5X80 decoder module includes the decoder board. For more info click here
Unlike the
Neo and Ikôn: Decoder library is required since the installed HHP 5X00 is a subassembly with a licensed decoder. For more info click here
Related Articles:
NEO WM6.1 Classic: How to activate the HHP 5000 Imager after performing factory default (clean start)
Ikôn CE5.0: How to activate the HHP 5000 Imager after performing factory default (clean start)
Ikôn WM6.1: How to activate the HHP 5000 Imager after performing factory default (clean start)
XT15 CE6.0 + ICS 16.0: How to activate the Intermec Imager after performing factory default (clean start)
XT15 WEH 6.5 + ICS 16.0: How to activate the Intermec Imager after performing factory default (clean start)
Additional Information
.
Source

+ Applicable Products
- 7530 G2 Mobile Computer
- EP10 Mobile Computer
- Omnii XT15
- Omnii XT15 Mobile Computer Series
- Omnii XT15f
- Omnii XT15ni
- Workabout Pro 3