How to Use EConnect with a 4-slot Ethernet Cradle and the MC90xx?

Article ID: 14049214

Question

How to Use EConnect with a 4-slot Ethernet Cradle and the MC90xx?

Facts

CE.NET 4.2 and Mobile 2003 MC90xx devices, using the 4 Slot Ethernet Cradle

Answer

When MC90xx is placed in the Ethernet cradle, the light on the cradle blinks red and the MC90xx will not communicate.

Change the connection to USB in the eConnect settings.
  1. Click on the eConnect icon on the MC90xx.
  2. Tap the Establish TCP/IP Connection checkbox and select USB from the Serial Port Baud Rate drop down menu.
  3. Double-tap OK to enter the settings and complete the eConnect installation.
  4. Place MC90xx in cradle and it should now establish a connection.