RW Printer MCR "echo" option not functional

Topic or Information

The printer may not print the MCR data using the echo option of the MCR command if the printer is not in line print mode.

Applies To

Zebra RW Series Mobile Printers

Details

If one chooses to use the ECHO option of the MCR command to print the data that is read by the MCR, one needs to insure the printer is configured for LINE_PRINT mode.

The printer can be configured for LINE_PRINT mode either by using the Label Vista utility or by sending the following command to the printer.

! U1 setvar "device.languages" "line_print"