Returning the QLn configuration label to the host

Article ID: 37316311



Topic or Information

The command that enables one to return a configuration label to the host (test.report_diags) is unavailable on the QLn series printers.

Applies To

Zebra QLn Series Mobile Printers


One is able to save the results of a 2key test(configuration label) into the printers memory by issuing the following set of commands.

! U1 do "device.save_2key" "now"     (This will store a file on the printer whose contents are the configuration label)

! U1 do "file.type" "2key.txt"              (This will send the contents of the file named 2key.txt to the host)

Additional Information

Sending File to Printer Using ZDesigner Driver  Read More>>

Sending File to Printer Using Zebra Setup Utilities  Read More>>

Printing a 2 key test Read More>>

+ Product Codes

  • QLn Series Healthcare Mobile Printers
  • QLn Series Mobile Printers
  • QLn220 Healthcare
  • QLn220 Mobile Printer
  • QLn320 Healthcare
  • QLn320 Mobile Printer
  • QLn420 Mobile Printer