Road Warrior Vehicle Cradle Serial port information

Article ID: 00571935

Details


 

Topic or Information

Road Warrior vehicle cradle serial port information

Applies To

Zebra RW Series Mobile Printer Vehicle Cradle

Details

The Road Warrior vehicle cradle has a RS232c connector that can be used to communicate to the printer through the vehicle cradle. The serial connector for the Road Warrior vehicle cradle is a DB-9 connector. DB-9 Shielded connector has a standard pin configuration as follows:

Pin      Signal 

 
1          No Connection
2          RXD input
3          TXD output
4          DTR output
5          GND
6          DSR input
7          RTS output
8          CTS input
9          No Connection