SEMM 2.2 Cannot Discover or Manage a WS5100

Article ID: 24697598

Question

Why SEMM 2.2 Cannot Discover or Manage a WS5100?

Facts

SEMM 2.2 Cannot Discover or Manage a WS5100 Unless SNMP Settings Are Full Read/Write SEMM 2.2, WS5100 running 2.0.0.0-34R software

Answer

If the SNMP settings of the WS5100 are not set to full read write, SEMM 2.2 does not discover the WS5100 or only displays the IP address and other limited information from the WS5100. There may also be problems managing the WS5100 or viewing MIB information via SEMM 2.2. 
To manage the switch and view the MIBs via SEMM 2.2,  create the wireless profile and set the SNMP to read/write, by clicking Tools ->Discovery Setup ->SNMP profiles