ZT Series Printer Label Counter (Printing x of x) is not present on display

Article ID: 24462771

Issue / Question

The LCD Display label count is not present in the ZT Series Printers.

Applicable To

ZT400 Series Printers, ZT230 Printers, ZT510 and ZT610/ZT620

Resolution / Answer

The LCD Print Counter "Printing 1 of x" was knowingly omitted from the ZT Series functionality.


New:

A command was added in firmware version V75.20.01Z (ZT410 & ZT420) / V72.20.001Z (ZT230) and later that enables an LCD Display Counter function.

The ZT510 and ZT600 printers have had this functionality from launch.


Here is the command to enable the counter:

! U1 setvar "display.batch_counter" "enabled"


Here is the command to disable the counter:

! U1 setvar "display.batch_counter" "disabled"


Here is the command to check the status of the counter:

! U1 getvar "display.batch_counter"



Helpful Information:

+ Product Codes

  • All Surface RFID Label Solution
  • ZT200 Series Industrial Printers
  • ZT230 Industrial Printer
  • ZT400 Series Industrial Printers
  • ZT400 Series RFID Printers
  • ZT410 Industrial Printer
  • ZT410 RFID Industrial Printer
  • ZT420 Industrial Printer
  • ZT420 RFID Industrial Printer
  • ZT500 Industrial Printers
  • ZT600 Series Industrial Printers
  • ZT610 Industrial Printer
  • ZT620 Industrial Printer