DS4608-SR and DS4608-HC General Purpose Scanner Support
DS4608-SR
DS4608-HC
Here are support and repair resources for your Barcode Scanner.
+ First Time Setup / Getting Started
The Setup guidelines below will take you to English documentation. You can access the localized User Guides in the MANUALS section.
Confirm that you have the following equipment.
- DS4608-HC scanner
- Zebra proprietary USB cable
- (Other host interfaces setup are described in the DS4608-HC Scanner Product Reference Guide (for example, Keyboard Wedge Interface)
First Time Connection steps
1. Connect the RJ41 end of the USB cable to the handle of the DS4608-HC scanner.
2. Connect the USB end of the cable to your computer USB port.
3. The DS4608-HC will power up with low, medium, high beeps
4. Pull the DS4608-HC trigger and confirm a scan beam is present.
5. Scan Return to Factory Defaults programming barcode from the DS4608-HC Quick Start Guide.
Note: When scanning a programming barcode from a screen/monitor, increase magnification to a minimum of 125%. This will ensure good barcode quality for a successful scan.
6. To test sending a barcode, open a text document in an application such as Microsoft Word or Notepad.
Ensure that you can type into the text document using your keyboard.
Scan a product barcode.
7. The scanned barcode will be displayed in the text document.
Keyboard Language (Country Code) Information
If Windows is configured for a region’s local keyboard and does not use an English keyboard layout, transferred barcode data may appear inaccurate.
Identify the language Windows uses and scan a compatible keyboard language configuration barcode (country code) USB Country Keyboard Types (Country Codes)
Consult the DS4608 Imaging Scanner Product Reference Guide (or available language copy) for additional scanner setup information.
The Setup guidelines below will take you to English documentation. You can access the localized User Guides in the MANUALS section.
Confirm that you have the following equipment.
- DS4608-SR scanner
- Zebra proprietary USB cable
- (Other host interfaces setup are described in the DS4608-SR Scanner Product Reference Guide (for example, Keyboard Wedge Interface)
First Time Connection steps
1. Connect the RJ41 end of the USB cable to the handle of the DS4608-SR scanner.
2. Connect the USB end of the cable to your computer USB port.
3. The DS4608-SR will power up with low, medium, high beeps
4. Pull the DS4608-SR trigger and confirm a scan beam is present.
5. Scan Return to Factory Defaults programming barcode from the DS4608-SR Quick Start Guide.
Note: When scanning a programming barcode from a screen/monitor, increase magnification to a minimum of 125%. This will ensure good barcode quality for a successful scan.
6. To test sending a barcode, open a text document in an application such as Microsoft Word or Notepad.
Ensure that you can type into the text document using your keyboard.
Scan a product barcode.
7. The scanned barcode will be displayed in the text document.
Keyboard Language (Country Code) Information
If Windows is configured for a region’s local keyboard and does not use an English keyboard layout, transferred barcode data may appear inaccurate.
Identify the language Windows uses and scan a compatible keyboard language configuration barcode (country code) USB Country Keyboard Types (Country Codes)
Consult the DS4608 Imaging Scanner Product Reference Guide (or available language copy) for additional scanner setup information.
+ Drivers
-
USB CDC Driver Support
The driver is used to emulate a virtual RS232 Communication port using a USB port on a Windows PC.
-
JPOS Driver
(Java for Point of Sale) is a standard for interfacing POS software, written in Java, with Zebra hardware used to create a point-of-sale system.
-
OPOS Driver
The driver enables bar code data communication between any scanner and an OPOS-compliant POS application.
-
Windows Management Instrumentation Driver
The driver enables local and network remote management of a scanner.
+ Manuals
-
DS4608 Digital Scanner Quick Start Guide (en)
MN-003599-01EN Rev. A
Download 2 MB -
DS4608 Imaging Scanner Product Reference Guide (en)
MN-003378-05EN Rev. A
Download 22 MB -
DS4608-HC Digital Scanner Quick Start Guide (en)
MN-004107-01EN Rev. A
Download 1 MB -
Healthcare Scanners Configuration and Quick Setup Guide for Allscripts (en)
MN-004101-01EN Rev. A
Download 407 KB -
Healthcare Scanners Configuration and Quick Setup Guide for Cerner (en)
MN-004102-01EN Rev. A
Download 416 KB -
Healthcare Scanners Configuration and Quick Setup Guide for Epic (en)
MN-004103-01EN Rev. A
Download 408 KB -
Healthcare Scanners Configuration and Quick Setup Guide for Meditech (en)
MN-004104-01EN Rev. A
Download 408 KB -
Multicode Data Formatting and Preferred Symbol User Guide
MN-002895-02 Rev. A
Download 3 MB -
Plural Stage Programmer’s Guide (en)
Programming barcodes for Plural Stage barcode decoding.
Download 626 KB -
Toshiba TEC Programmer’s Guide (en)
Programming barcodes for Toshiba TEC host.
Download 1 MB -
Advanced Data Formatting Programmer Guide
Programing barcodes and instructions for customizing scanned data.
Download 1 MB
+ Utilities
-
123Scan Utility Support
Zebra scanner configuration utility.
-
Zebra Evolution Update
Subscribe to this quarterly email. It lists the latest updates to your scanner’s firmware and Zebra software tools.
-
Scanner Update Utility For Windows 10 (32 and 64bit)
A basic firmware and configuration update tool for use in stores, hospitals, warehousing environments. Use of this tool requires staging by an IT department.
-
Scanner Control App
This demo app enables Zebra cordless scanners to be connected and controlled by a tablet or a smartphone.
-
Scanner Management Service for Windows
Allows remote management of Zebra scanners from your PC with a Windows OS.
+ Developer Tools
-
Scanner SDK for Windows
Scanner Software Developers Kit (SDK) for Windows includes Sample applications for C++ and C#, OPOS, JPOS, and Windows Management Instrumentation (WMI) drivers and test utilities.
-
Scanner SDK for Android
Scanner Software Developers Kit (SDK) for Android enables the development of custom scanner control apps for Zebra scanners.
-
Scanner SDK for Linux
Scanner Software Developers Kit (SDK) for Linux includes the JPOS driver, Development libraries and header files for application developers, and Test and Sample utilities.