MC31 CE 6.0 - BSP v06.37.13 - HotFix CFE v01.04.00 Release Notes
Introduction
HotFix CFE (Cumulative Fixes from Engineering) Package contains multiple SPR Hotfixes into a single package. The HotFix CFE Package helps the end users to keep up to date with all the SPR hotfixes for given product software release / revision.
HotFix CFE packages are validated only by engineering validation team and the package follows Zebra Technologies HotFix Package Policy. Click here to view HotFix Package Policy.
Description
CFE package CFE_MC31_CE_063713_EN_v010400_e_WB.cab / CFE_MC31_CE_063713_EN_v010400_e_NB.cab file includes the following HotFixes:
SPR No |
Synopsis |
32201 |
Internet Explorer Encoding is missing on device |
30203 |
Device does not resume after 2 times of suspending the device |
27221 |
Device does not scan QR barcode |
28458 |
Device does not resume from suspend mode by pressing power button during customer application running. SDIO patch with latest Fusion resolves this issue. This SPR fix corrects the following SPR issues.
|
This HotFix CFE package CFE_MC31_CE_063713_EN_v010400_e_WB.cab / CFE_MC31_CE_063713_EN_v010400_e_NB.cab obsoletes the following HotFix CFEs:
HotFix CFE version |
Product |
CFE_MC31_CE_063713_EN_v010300_e_WB.cab CFE_MC31_CE_063713_EN_v010300_e_NB.cab CFE_MC31_CE_063713_EN_v010200_e_WB.cab CFE_MC31_CE_063713_EN_v010200_e_NB.cab CFE_MC31_CE_063713_EN_v010100_e.cab |
MC3190 |
Note: Latest CFE package includes previous CFE package hot fixes and new SPR hotfix.
Package Details
CFE_MC31_CE_063713_EN_v010400_e_WB.cab (CFE package with auto Warm boot)
CFE_MC31_CE_063713_EN_v010400_e_NB.cab (CFE package without auto Warm boot)
Device Compatibility
This HotFix CFE Package software release has been approved for use with the following Zebra devices.
Device |
Operating System |
BSP Version |
MC31 |
CE 6.0 |
v06.37.13 |
Installation Requirements
The HotFix CFE cab can be deployed to the Mobile device through any one of the below mentioned methods. For installing the cab, the users should have at least one of the below mentioned tools.
- Windows Mobile Device Center (For Windows Desktops)
- SD Cards / Micro SD cards
- MDM set up
Installation Instructions
For Normal installation of the PATCH:
· Windows Mobile Device Center (For Windows Desktops) Installation Instructions:
1. Copy "CFE_MC31_CE_063713_EN_v010400_e_WB.cab" file to the Application folder on the device.
2. Deploy the solution by tapping on the "CFE_MC31_CE_063713_EN_v010400_e_WB.cab" file.
3. After successful deployment of the "CFE_MC31_CE_063713_EN_v010400_e_WB.cab" file, device will do an automatic warm boot.
· SD Cards / Micro SD cards Installation Instructions:
1. Copy "CFE_MC31_CE_063713_EN_v010400_e_WB.cab" file to the SD card.
2. Deploy the solution by tapping on the "CFE_MC31_CE_063713_EN_v010400_e_WB.cab"
3. After successful deployment of the "CFE_MC31_CE_063713_EN_v010400_e_WB.cab" file, device will do an automatic warm boot.
For MSP or REMOTE installation of the PATCH:
1. Set up MDM (MSP, Soti, Airwatch, etc..) to send "CFE_MC31_CE_063713_EN_v010400_e_NB.cab" file to the application folder of the device.
2. To deploy the solution, setup in MDM to install the cab file “CFE_MC31_CE_063713_EN_v010400_e_NB.cab" file.
3. Changes will take effect after a manual reboot of the terminal or if MDM reboots device.
Part Number and Release Date
June, 2017