Chat with us
Loader
Establishing connection, please wait while we connect you.

Workabout Pro 4 WEH Operating System BSP 3.0 Release Notes

Introduction

The Workabout Pro 4 is a modular, industrial hand held computer. Microsoft Windows CE Professional 6 is one of the two OS options for this device.

Description

Improvements in the OS release:

- Update to Fusion version (2.02.0.0.023R)

    - FIPS 140-2 Level 1 Compliant

    - SHA2 Certificate support

- Update WWAN network name list to GSMA TS.25 version July13_2015

- Update GPRS operator database

- Update translations in some control panel applets (Compass, Notify)


Contents

7528 Windows Embedded Handheld 6.5.3 OS Image v3.0

Device Compatibility

This software release has been approved for use with the following Symbol devices. 

Device

Operating System

Workabout Pro 4 (7528)

Windows Embedded Handheld 6.5.3

 

Installation Requirements

If previously installed, uninstall '7528 Release 2.3 OS Patch v1.1'.

Installation Instructions

To uninstall 7528 Release 2.3 OS Patch v1.1, follow the procedure below: 

  1. Delete contents of \Application\tiinit folder.

  2. Clean start device or update operating system software.

To update the operating system software of the WAP 4, follow the procedure below: 

  1. If previously installed, uninstall '7528 Release 2.3 OS Patch v1.1' (Instructions above).

  2. The firmware can be upgraded using a USB Memory Stick or using a microSD Card.

  3. The firmware file must be renamed 7528os.img

  4. Copy the file containing the firmware upgrade to the root directory of the USB memory stick or Micro SD card

  5. Install the USB memory stick into the docking cradle or install the Micro SD card into the WAP 4 in the Micro SD slot in the battery compartment

  6. Press and hold down the [Blue FN] key, the [SCAN] key and the [Power] key, simultaneously for a minimum of six seconds.

  7. When the update is complete, the device reboots to the main operating system.

  8. Remove the MicroSD card from the device to prevent the device from performing the upgrade process again on the next cold boot, and then disconnect external power. The device is now ready to be used.

  9. Install add-on cab file.

Part Number and Release Date

P728XW65CPCB030000
P728XW65CPMI030000
P728XW65CTCB030000
P728XW65CTMI030000
P728XW65DECB030000
P728XW65DEMI030000
P728XW65ENCB030000
P728XW65ENMI030000
P728XW65FRCB030000
P728XW65FRMI030000
P728XW65ITCB030000
P728XW65ITMI030000
P728XW65JPCB030000
P728XW65JPMI030000
P728XW65KOCB030000
P728XW65KOMI030000
P728XW65SICB030000
P728XW65SIMI030000

 

January 15, 2016