TC8000 Operating System GA1 Release 01-00-54 WITHOUT GMS Release Notes
Introduction
What makes the TC8000 so special? Everything. It’s the ground-breaking all new warehouse mobile computer designed to deliver revolutionary productivity increases in the warehouse. In fact, on average, it saves 14% per worker versus the traditional form factors. And it’s the only device on the market that simplifies it all — how your workers physically use the device and interact with your warehouse application. The TC8000 minimizes motion with an innovative scan angle that eliminates the thousands of times your workers need to tilt their device to see the screen. We integrated flexible handheld and hands-free scanning for an extra productivity boost — another industry handheld first. It’s an amazing 33 percent lighter than the traditional device to minimize fatigue. And then we did something completely unprecedented by a device manufacturer — we integrated a tool that allows you to automatically transform your legacy Terminal Emulation (TE) “green screens” into elegant, graphics-based All-touch TE screens that are not only highly intuitive, but also dramatically reduce the number of interactions required to complete a task — no coding and no modifications to your host application are required. The result? Less time to complete the job and increased productivity. The TC8000 — the next big thing in warehouse mobility, only from Zebra.
• 8.02.11a/b/g/n connectivity for anywhere, anytime access to information
• Zebra's Mobility Extensions (Mx)
• Mobility DNA,a suite of mobility enabling applications, development tools and utilities
• Most advanced scan engine with longer range date capture capability
• Rugged and ready for every day enterprise use inside and outside the four walls
• Standard SKUs have 1GB RAM, 4GB Flash. Premium SKUs have 1GB RAM, 8GB Flash, and add a gyroscope, e-compass, camera, and NFC.
Description
TC8000 GA1 Release 01-00-54 WITHOUT GMS
Component Description and versions
Component / Description |
Version |
|
|
Product Build Number |
01-23257-K-01-54-00-MV |
Android Version |
4.4.3 |
Linux Kernel |
3.4.0 |
a-boot |
|
Android SDK Level |
19 |
Platform (TI/MPA/ etc) |
Qualcomm - APQ8060A Pro |
Bluetooth Stack |
NA |
Partition Table |
NA |
Flash Size |
4 or 8GB |
RAM Size |
1GB |
MSP Package |
7.08.85 (Included for Airwatch support only) |
Scanning |
5.41.0 |
SimulScan |
2.5 SimulScanEngine 1.10.1 |
Datawedge |
3.1.24 |
EMDK Service |
3.1.38 |
Mx / OSX |
MXMF: 4.4.34 / OSX_QCK_4.4-4 |
WiFi |
Fusion_QA_1.02.0.0.033 |
PTT Express |
3.1.20 |
Touch FW |
V0008 |
RxLog |
3.0.0.51 |
Mlog |
v06.52 / Service v06.52 |
B2M |
1.0.0.218 |
Bluetooth Pairing Utility |
3.3 |
DataAnalytics |
1.01.2107 |
File Browser |
1.13 |
Stage Now |
2.1.1.1425 |
App Gallery |
2.1.2 |
Battery Swap |
N/A |
Tech Docs |
None |
WWAN |
N/A |
RIL |
N/A |
TS.25 |
N/A |
WLAN FW |
MAAAAANAZW1240301 |
GPS |
N/A |
NFC |
V1.0.6 |
Sensors (Accel, Gyro, Light, Prox) |
N/A |
Camera |
N/A |
MSR |
N/A |
MobiControl |
12.2.0. Build 23469 |
Wavelink Velocity |
1.0.1.2044 |
Print Station |
1.3 |
Tap and Pair |
2.0 |
Zebra Utilities |
2.0.5152 |
Features Added/Supported
- Included rebranding changes for Zebra/Symbol namespace
- Included changes for APA v1 feature content
Storage and non-storage path
Key remapping
Battery Extras
RTC clock caching
- Support Bluetooth 4.0 (Supports both Classic and Bluetooth LE) with Broadcom Bluetooth Stack (Bluedroid)
- Included
StageNow client
Simulscan Demo
PTT Express
B2M Elemez
Data Analytics
App Gallery
SOTI MobiControl Stage
Wavelink Velocity Terminal Emulation
Zebra Printer Utilities, Tap and Pair, Print station
- Improved Imager scan response
Android security patches
FREAK attack patch for SSL
Integer overflow vulnerabilities in libstagefright
CVE-2015-1538, CVE-2015-1539
Use-after-free vulnerability in kernel handling of ping sockets
CVE-2015-3636
Google Android Partner Security Bulletin 2015 #11 Integer Overflow in libcutils
CVE-2015-1528
Google Android Partner Security Bulletin #14
CVE-2015-3873
CVE-2015-3872
CVE-2015-3871
CVE-2015-3867
CVE-2015-3869
CVE-2015-3870
CVE-2015-6598
CVE-2015-6599
CVE-2015-6600
CVE-2015-6601
CVE-2015-3876
CVE-2015-6604
CVE-2015-3874
CVE-2015-3875
CVE-2015-6602
CVE-2015-3877
Component Release Notes:
MX4.4 Feature List:
Feature |
Brief Description |
Clear Clipboard |
Clearing the data copied into clipboard |
Enable/Disable Clipboard |
Enable/Disable the clipboard features to cut/copy/paste |
Factory Reset |
Wipe - Data+Enterprise+Cache |
Enterprise Reset |
Wipe - Data+Cache |
Full Device Wipe |
Wipe - Data+Enterprise+Cache+Internal SD+External SD |
Enable/Disable Enterprise Reset in Settings App |
API to Enable/Disable the Enterprise Reset UI in Settings Application |
Display OSX Version |
OSX version can be seen in Settings => About Phone => SW Components => OSX version |
Enable Disable AppInfo Access |
Enabling and disabling , App info from settings |
Allow/Disallow App to submit XML |
Add/delete/query packages which are allowed to SubmitXML to MxMgtFw |
Enable Disable UMS/PTP/MTP |
MassStorage,MediaTransfer and PTP modes can be Blocked and Unblocked |
Enable Disable External USB Storage |
Enable/Disable Mounting of External USB Pen-drive storage with device |
Enable/Disable Browser |
Enable/Disable Native Browser Address Bar |
Enable/Disable access to Applications Section of Settings UI |
Hide Apps section of Settings Application |
Initiate NTP Sync |
Enable/Disable/Initiate NTP |
Ethernet Settings |
Enable/Disable & TurnOn/TurnOff |
Enable/Disable Use of Background Data |
Enable/Disable Background data in SIM devices |
Auto Correction |
Enable/Disable the ability of auto correction of words in soft keyboard |
Wifi |
Enable/Disable Wifi |
Wwan |
Enable/Disable Wlan |
Safe Mode |
Enable/Disable Safe mode |
Unknown sources |
Enable/Disable Unknown soures UI |
Enable/Disable Home Key |
Enable/Disable Home Key |
BT Pairing Pop up |
Enable/Disable BT pairing pop up |
Sdcard Usage |
Enable/Disable Sdcard Usage |
Enable/Disable Power button instantly lock |
Enable/Disable Power button instantly lock UI |
Turn On/Off Power button instantly lock |
Turn On/Off Power button instantly lock |
Enable Disable Airplane mode |
Enable/Disable Airplane mode UI |
Turn On/Off Airplane Mode |
Turn On/Off Airplane Mode |
Enable/Disable Power button menu items |
Enable/Disable menu displayed when power button is long pressed |
Hide/unhide Power button menu |
Hide/Unhide menu displayed when power button is displayed |
PTT Express 3.1.20
1. Major Features
a. After changing the talk-group or changing the status, the PTT Express user interface would be on the fore-ground to facilitate confirmation of the changed talk group and to allow user to continue making PTT calls when CallKeyConfig is 0 (on-screen buttons).
b. Recovery update procedure : Copy the Recovery update package for PTT Express installation/uninstallation for KK to the internal storage of respective device and perform the recovery update as per the procedures mentioned in the OS recovery update guidelines
c. To change the settings of the PTT Express client, modify the ptt_settings.xml file located at /enterprise/device/settings/ptt.
d. To enable Debug Logs, follow below steps:
1. Pull ptt_settings.xml from /enterprise/device/settings/ptt/ folder.
2. Edit< setting name="logLevel">Debug
3. Check for /storage/sdcard0/PTT folder.
4. Logs will be created with DEVICE_MODEL_MAC_ADDRES_PTT_log.txt
e. The previous log file is saved as DEVICE_MODEL_MAC_ADDRES_PTT_log.txt.bck.
f. The default log level is set to ‘None’ (to avoid issue 74744). Update value of ‘log_level’ in ptt_settings.xml to enable the logging.
g. Log file should not be renamed or deleted while logging is active. Copy the log file to PC or other folder if snapshot log file has to be created.
h. Use ‘adb’ to copy the logs to PC.
i. CDR log file will be created, if not exist, only when enableCDR is true and the first call happens on channel whose CDR is true or Private call.
j. PTT HEADSET Usage Notes:
k. Group call is initiated by pressing (and holding) headset button. Due to special PC implementation, there will be 600ms delay after user presses the headset button. User shall start speaking only after talk permit tone is played.
l. Private call is initiated by pressing headset button in following sequence: Down, Up and Down (and hold). These 3 clicks shall occur within 600ms. If there are more than 3 clicks within 600ms, then the clicks will be discarded and nothing will happen.
m. Enabling display of call statistics - The PTT Express client provides a toggling option on the settings page to enable/disable the display of toast messages showing call statistics.
n. Mute functionality - The PTT express client allows itself to be muted and un-muted using the mute button on the main dialog, or using the key configured in the ptt_settings.xml or using intents. When the client is muted, it is indicated on the UI and on the status bar. While in Mute state, the client’s audio and tones are muted and PTT key events ignored. The Mute functionality is not persistent across the reboots or application restarts. However the Mute functionality is persistent across Enable and Disable of the service.
o. Audio feedback Functionality – The PTT Express client allows voice feedback on Channel and Profile Switch. The configuration “audioFeedback” should be set as Default to enable the Audio feedback. Based on the language value set in the profiles, the audio would be played, in that specific language. The value of the language is set as locale string defined in http://developer.android.com/reference/java/util/Locale.html. Only installed languages are supported and the language list would be listed in accessibility settings on the device.
p. PTT supports Airwatch and SOTI MDM for deploying configuration changes.
q. Full-duplex client co-existence - The PTT Express client supports a configurable option “fullDuplexClientCoexistance” to coexist with full duplex WAN or VOIP client. There is another configurable option “vibrateOnVoiceCall” which allows full duplex incoming calls to vibrate when PTT is in call. The following is applicable when “fullDuplexClientCoexistance” is set to true:
r. When there is an outbound call made or when an inbound call is accepted on the full duplex client, PTT Express enters into co-existence mode by muting itself and showing yellow icon on the status bar. It also stops playing out any tones or calls and ignores key requests for PTT calls.
s. When a full duplex call terminates, PTT Express exits the co-existence mode to resume normal operations.
t. Few full duplex clients allows PTT Express to exit coexistence mode when its call is put on hold and then enter back to coexistence mode when the call moves out of hold state.
2. SPR fixes
1. SPR 28025 Disabling PTT express via SOTI.
3. Known issues
a. The coexistence solution is dependent on the announcement of states done by the full duplex client. Few variations mentioned beneath have been observed in which case PTT Express client may not be able to enter or exit from coexistence mode.
b. While coexisting with few versions of VOIP clients and the WAN client, PTT Express cannot come out of coexistence state when a call is put on hold.
c. Specific version of Jabber client is not seen to announce MODE_RINGTONE due to which PTT Express cannot honor “vibrateOnVoiceCall” settings.
d. Certain full-duplex clients are at times seen to fail in announcing their call states which can result in PTT Express not entering/exiting coexistence mode as expected. It can be recovered when a succeeding inbound/outbound established call is terminated. In some cases, a warmboot might be required
e. After Reset (or) reboot key presses will not be detected for initial 30 secs.
DataWedge 3.1.24
Updated
Copyright information to Symbol Technologies LLC.
Fixed
EMBPD00163103 - Datawedge demo doesn’t show options when menu hard key is pressed.
EMBPD00176367 - Bottom line of buttons on DW demo needs to be pressed for long time.
EMBPD00178656 - First barcode does not get decoded on DWdemo when device kept in Landscape.
Exclusions:
· USB Mass Storage support deprecated in KitKat
· MSP not supported
· Workforce Connect will be supported in a future release
· Power Precision Plus UI will be supported in a future release
Contents
File |
Description |
Details |
TC8K0K300PUWW10054.zip |
SFW: FullPkgUpd,AND,KK,v10054,RELEASE |
Full Software Update |
TC8K0K3E0REWW10054.zip |
SFW: EntResetPkgUpd,AND,KK, RELEASE |
Wipes all partitions/folders except Enterprise partition |
TC8K0K3F0RFWW10054.zip |
SFW: FacResetPkgUpd,AND,KK, RELEASE |
Wipes all partitions/folders including Enterprise partition |
Device Compatibility
This software release has been approved for use with the following Symbol devices.
Device |
Operating System |
TC80Nx - All SKUs |
Android 4.4.3 |
Installation Requirements
This Software can be used with compatible devices listed above
Installation Instructions
1. Attach the USB cable to the TC8000, then attach the cable to the PC.
2. To update the TC8000 software, download the Full Package Update from Zebra Support Central to your PC.
The file name is TC8K0K300PUWW10054.zip
3. Copy the .zip file above from your PC to your TC8000’s storage.
4. Put the TC8000 into Recovery Mode using the following steps:
· Hold the Power Key until “Reset” option appears, then release the power key
· Tap the “Reset” option in the menu and then immediately hold the "Power key" and "Scan Key” until the Zebra boot screen is displayed.
5. Once on the Recovery Screen, scroll up/down using “Volume Keys” +/- to "Apply update from internal storage" and press the “Scan Key” to select
6. Next, scroll up/down using “Volume Keys” +/- to the location where you copied the files and press the “Scan Key” to select the desired folder
7. Highlight the zip file you wish to install, and press the "Scan key" to select
8. Once the install completes, you will be back at the Recovery Mode screen.
9. If you wish to reset the TC8000 to factory settings, repeat the above process with the Factory or Enterprise reset package:
· TC8K0K3F0RFWW10054.zip (Factory Reset Package),
· TC8K0K3E0REWW10054.zip (Enterprise Reset Package).
10. Once you finish installing the required files, you will be back at the Recovery Mode screen. Select “reboot system now” with the “Scan Key”. The TC8000 will reboot, then you will see “Android is upgrading…” and then you will see the Android home screen.
Part Number and Release Date
TC8K0K300PUWW10054
TC8K0K3E0REWW10054
TC8K0K3F0RFWW10054
Dec 18, 2015