MC67ND Premium OS v05.57.04 | WEHH 6.5 Professional Release Notes | Zebra

MC67ND Premium Operating System v05.57.04 - WEHH 6.5 Professional Release Notes

Einführung

Give your field workforce all the tools they need to work faster and smarter with the rugged 4G HSPA+ and CDMA / EVDO MC67. With the MC67, your workers can do whatever it takes to get the job done. Access information in your backend system. Scan practically any bar code in almost any condition. Capture documents to simplify recordkeeping. Take and send video and photos for real-time repair support. Call a customer with an arrival window. All at 4G HSPA+ or CDMA / EVDO speed. So whether your workers are involved in sales, service, deliveries, inspections or issuing citations, they have the tools they need to improve efficiency, accuracy and customer service - all in one rugged device that loves life in the field.

Beschreibung

Update Loader Image 05.57.04 contains the Software required to update an MC67ND Premium device to the Rev E software release.

  • WEHH 6.5 Professional AKU 29366 (5.3.12.48)
  • FPGA ver. 2.19

General Enhancements in 05.57.04:

·        Fusion Software X_2.03.0.0.014R

·        EA 2.57

·        RIL 02.06.0.4

·        WAN Firmware 03.320 ARN 01.000.06

·        DataWedge 3.7.16

·        StoneStreet BT Ver 2.1.1 Build 28342

·        Included Updated emscript/CaptureDump

·        SOTI MobiStage client version v12.1.0 (Build-1026)

·        Support for AMI306M e-compass sensor

SPR Fixes

·        SPR 27607 -  Resolved an issue where by RS507 experiences a "3-sec delay" in scanning after 100+ scans

·        SPR 28674 - Added support for populating registry entry for IMEI/MEID on MC67 device

·        SPR 28853 - Resolved an issue wherein MC67 device was sending wrong key values when using numeric keypad.

·        SPR 28004 - Disabled orange/blue LEDs on MC67 DSD keypad devices.

·        SPR 23768 - Resolved an issue where inconsistent charging was observed on MC67 device.

·        SPR 27938 - Resolved an issue where camera settings are not persistent after warm/cold boot

·        SPR 30040 -  Resolved an issue where devices freezing was observed when using some customer application along with appcenter and SOTI

·        SPR 26114/SPR 27871 - Resolved an issue where bluetooth radio takes more than 40 seconds to re-cycle after battery swap

·        SPR 29422 - Resolved an issue where VCD5500-1001R will cause MC67device to "fast blink" and fails to charge

·        SPR 30276 - Resolved an issue where imager illumination is on when LampOn property is set to False in MC67 device

·       SPR 28381 - Resolved an issue wherein volume gain was not set correctly

·       SPR 28105 - Resolved an issue where "PowerKey Action" window was not shown when some applications are running in full screen mode

·       SPR 29002/SPR 28606- Resolved an issue where probe request contains incorrect channel information that prevents some of the hotspots/APs from sending probe response

Inhalt

  1. 67NDw65HenZP055704.zip - There are 2 packages included in a ZIP file - Partition Table & FPGA as one package and OS package along with instructions
  2. 67NDw65HenAB055704.zip - A package file for OS package, WAN Firmware and Audio update deployment using AirBeam. Paket enthält die Hochladeanweisungen für die MSP-Installation.

Gerätekompatibilität

This software release has been approved for use with the following Zebra devices.

Gerät

Betriebssystem

MC67ND Premium

Microsoft WEHH 6.5 Professional

Installationsanforderungen

MC67ND device must contain a released version of Microsoft WEHH 6.5 Professional

Installationsanleitungen

Update Loader Package:

     Standard Update Procedure -Device is cleaned of all persistent storage data. use this to update your device to a newer version of the OS.

1.     Download the Update Loader Package 67NDw65HenZP055704.zip

2.     Unzip the contents of 67NDw65HenZP055704.zip, after extraction 3 files are available 67NDw65HenSS000219.zip, 67NDw65HenUL055704.zip, PXS8_FW03.320_00_R.CAB

3.     Unzip each packages & install in the order 67NDw65HenSS000219.zip, 67NDw65HenUL045613.zip, PXS8_FW03.320_00_R.CAB

a.      Copy all files into either the \Temp folder on the device or at the root directory of a Storage Card.

b.     If the contents are copied to SD card then place the SD card in the device to be upgraded.

c.      Place the device to be upgrade on an A/C power.

d.     Navigate to the SD Card or \Temp folder and invoke the program STARTUPDLDR.EXE.

e. The update will take about 5 minutes to complete. Please do not remove the device from A/C power during this time.

f.      Once the download completes and the system reboots, the update is complete and the device is ready for use.

4.     For detailed instructions please see "INSTRUCTIONS.TXT" which is part of 67NDw65HenZP055704.zip

 

Airbeam Users:

    Standard Update Procedure - This method erases all data in the Persistent storage of the device.

1.     Download the Airbeam OSUpdate Package 67NDw65HenAB055704.zip

2.     Apply the Airbeam Update packages

3.     Once the download completes and the system reboots, the update is complete and the device is ready for use.

4.     For detailed instructions please see "MC67_MSP_Installation_Instructions.txt" which is part of 67NDw65HenAB055704.zip for update through MSP

 

Downgrade to v04.56.13 or older:

Standard Downgrade Procedure:

1.     Download the Update Loader Package 67NDw65HenUL045613.zip or older

2.     Unzip the package and copy all files into either the \Temp folder on the device or at the root directory of a Storage Card.

3.     If the contents are copied to SD card then place the SD card in the device to be upgraded.

4.     Place the device to be upgrade on an A/C power.

5.     Navigate to the SD Card or \Temp folder and invoke the program STARTUPDLDR.EXE.

6. The update will take about 5 minutes to complete. Please do not remove the device from A/C power during this time.

7.     Once the download completes and the system reboots, the update is complete and the device is ready for use.

 

Hinweise:

For devices having Ortus display -Downgrading from RevE v05.57.04/RevD v04.56.13/RevC v03.51.03 to RevA v01.28.00 is not allowed on devices having ortus display, since Rev A image doesn't support "Ortus display".

o To identify display type on the device, go to Start-Settings-System Info-ConfigInfo tab. If display id is COM35H3N81 then device uses Ortus display

By default, "Update Loader/Airbeam" packages will NOT delete contents of the Application partition.

o   If the user intents to clean application partition via update loader, "67NDw65HenCA000001.bin" needs to added to "pkgs.lst"

o   If the user intents to clean application partition via Airbeam, please use "67NDw65HenCA000001.apf" package.

Please check "INSTRUCTIONS.TXT" on how to upgrade the WAN firmware to “03.320 ARN 01.000.06”

If the WAN firmware is upgraded to “03.320 ARN 01.000.06” (available in 67NDw65HenZP055704.zip) it is not recommended to downgrade the OS as WAN firmware “03.320 ARN 01.000.06” is not compatible with OS releases earlier than 05.57.04

Part Number and Release Date

67NDw65HenAB055704

67NDw65HenZP055704

13. Februar 2017