5095 Resin Ribbon
High-performance resin ribbon for use on matte and gloss synthetics
|Base Film Caliper||4.5 microns|
|Total Caliper||6.5 microns +/- 10%|
|Scanning Capabilities||IR and visible light|
|Recommended storage conditions (before use)||1 year duration when stored at 23°F to 104°F/-5°C to 40°C at 20% to 85% RH|
|10 or 12 mil normal code up to 203.2mm/sec print speed||Typical ANSI Grade A|
|15 mil rotated code up to 152.4mm/sec print speed||Typical ANSI Grade B|
|Glass cleaner with ammonia||Good|
|Brake Fluid||Test in your application|
|Gasoline||Test in your application|
|Alcohol (90% Isopropyl Alcohol)||Good|
Z-Ultimate® 3000T White
5095 ribbon complies with the following:
REACH/ Substances of Very High Concern (SVHC)
P4T, desktop, mid-range and high-performance thermal printers, Zebra engines, other legacy Zebra printers
Other widths/lengths are available on request subject to minimum order quantities and lead times
The information contained in this document is to be used for guidance only and is not intended for use in setting specifications. All purchasers of Zebra products shall be solely responsible for independently determining if the product conforms to all requirements of their unique application. All products should be pre-tested to ensure they meet all intended requirements of specific end-use applications.
For testing of this ribbon on Zebra mid-range and high-performance printers please order part number 05095BK11005. For testing on other printer models, please contact your Supplies Specialist representative.
1. Scannability testing was performed on synthetic facestock labels using Zebra printers.
2. Print durability testing was performed on Z-Xtreme™ 4000T White using 10 cycles (20 rubs) with the Crockmeter.