CS60 and CS60-HC Series Companion Scanner Support
CS60
CS60-HC
Here are support and repair resources for your Barcode Scanner.
+ First Time Setup / Getting Started
The Setup guidelines below will take you to English documentation. You can access the localized User Guides in the MANUALS section.
Confirm that you have the following equipment.
- CS6080 scanner
- CR6080-SC Cradle
- Zebra proprietary USB-C to USB-A cable
- (Other host interfaces setup are described in the CS6080 Companion Scanner Product Reference Guide (for example, Keyboard Wedge Interface)
First Time Connection steps
1. Connect the USB-C end of the USB cable to the CR6080 cradle.
2. Connect USB-A end of the cable to your computer USB port.
3. Confirm that the CR6080 cradle has a Green LED indicating power.
4. Press the CS6080 trigger and confirm a scan beam is present.
Note: It is recommended to fully charge the CS6080 battery before first use
5. Scan Return to Factory Defaults programming barcode from the CS6080 Quick Start Guide.
Note: When scanning a programming barcode from a screen/monitor, increase magnification to a minimum of 125%. This will ensure good barcode quality for a successful scan.
6. To pair the CS6080 scanner with the CR6080 cradle, insert the scanner in the cradle or scan the pairing bar code. See Pairing Methods
*A high/low/high/low/beep sequence indicates that the pairing bar code was decoded. When a connection between the cradle and digital scanner is established, a low/high beep sound.
7. To test sending a barcode, open a text document in an application such as Microsoft Word or Notepad.
Ensure that you can type into the text document using your keyboard.
Scan a product barcode.
8. The scanned barcode will be displayed in the text document.
Keyboard Language (Country Code) Information
If Windows is configured for a region’s local keyboard and does not use an English keyboard layout, transferred barcode data may appear inaccurate.
Identify the language Windows uses and scan a compatible keyboard language configuration barcode (country code) USB Country Keyboard Types (Country Codes)
Consult the CS6080 Scanner Product Reference Guide (or available language copy) for additional scanner setup information.
+ Drivers
-
USB CDC Driver Support
The driver is used to emulate a virtual RS232 Communication port using a USB port on a Windows PC.
+ Manuals
-
CS6080 Scanner Product Reference Guide (en)
MN-003827-06EN Rev. A
Download 24 MB -
CS6080 Accessories Regulatory Guide (en)
MN-003855-01EN Rev. A
Download 561 KB -
CS6080 Scanner Quick Start Guide (en)
MN-003828-04EN Rev. A
Download 2 MB -
Healthcare Scanners Configuration and Quick Setup Guide for Allscripts (en)
MN-004101-01EN Rev. A
Download 407 KB -
Healthcare Scanners Configuration and Quick Setup Guide for Cerner (en)
MN-004102-01EN Rev. A
Download 416 KB -
Healthcare Scanners Configuration and Quick Setup Guide for Epic (en)
MN-004103-01EN Rev. A
Download 408 KB -
Healthcare Scanners Configuration and Quick Setup Guide for Meditech (en)
MN-004104-01EN Rev. A
Download 408 KB -
Multicode Data Formatting and Preferred Symbol User Guide
MN-002895-02 Rev. A
Download 3 MB -
Plural Stage Programmer’s Guide (en)
Programming barcodes for Plural Stage barcode decoding.
Download 626 KB -
Zebra Scanner SDK for Android Developer Guide (en)
This SDK enables developers to create Android app that fully control a Zebra scanner with both a cabled and Bluetooth connection.
Download 2 MB -
Advanced Data Formatting Programmer Guide
Programing barcodes and instructions for customizing scanned data.
Download 1 MB
+ Utilities
-
123Scan Utility Support
Zebra scanner configuration utility.
-
Advanced Data Formatting Support
ADF enables the scanner to modify the data before transmission to a host. It is programmed using 123Scan.
-
Zebra Evolution Update
Subscribe to this quarterly email. It lists the latest updates to your scanner’s firmware and Zebra software tools.
-
Scan-To-Connect Utility for Windows
Enables a Zebra Bluetooth scanner to pair with a PC in one simple step.
-
Scanner Update Utility For Windows 10 (32 and 64bit)
A basic firmware and configuration update tool for use in stores, hospitals, warehousing environments. Use of this tool requires staging by an IT department.
-
Scanner Control App
This demo app enables Zebra cordless scanners to be connected and controlled by a tablet or a smartphone.
-
Scanner Management Service for Windows
Allows remote management of Zebra scanners from your PC with a Windows OS.
-
Scan-To-Connect Utility for Android
Enables a Zebra Bluetooth scanner to pair with a phone, or tablet in one simple step.
+ Developer Tools
-
Scanner SDK for Windows
Scanner Software Developers Kit (SDK) for Windows includes Sample applications for C++ and C#, OPOS, JPOS, and Windows Management Instrumentation (WMI) drivers and test utilities.
-
Scanner SDK for Android
Scanner Software Developers Kit (SDK) for Android enables the development of custom scanner control apps for Zebra scanners.
-
Scanner SDK for Linux
Scanner Software Developers Kit (SDK) for Linux includes the JPOS driver, Development libraries and header files for application developers, and Test and Sample utilities.
-
Scanner SDK for iOS
Scanner Software Developers Kit (SDK) for iOS enables MFi or Bluetooth Low Energy (BLE) cordless scanners to be connected and controlled by an iPad, iPhone, or iPod Touch without using a cradle.